Tips for Proper Installation and Maintenance of Inverted Flare Fittings

1
Copyright by thestopshop.com
2
The inverted flare fittings are a key component
of a brake line system. You want your vehicle
brakes to operate safely and optimally. The
brakes will perform optimally ensuring proper
maintenance of the inverted flare fittings. Apart
from proper installation, you will have to ensure
adequate maintenance of this component. This
guide focuses on important tips to follow to
ensure that you have a safe and reliable brake
system. The inverted flare fittings Tips for
proper installation and maintenance Be familiar
with the flare fitting Before you install this
component, try to understand it properly. This
component comes with a flare and a threaded nut.
When fixed to the 3/16 brake line, it forms a
tight seal.
Copyright by thestopshop.com
3
Always use the right tools When installing and
maintaining the inverted flare fittings, make
sure to always use the right tools. Ensure that
your toolset has tools like flaring tools, tubing
cutters, and so on. Improper tools can cause
leaks or damage the fittings. Cut all tubing the
right way The copper brake line is made up of a
tube. Always ensure that you cut all tubes with
the right tools. Using tools like a tubing cutter
will give you smooth square cuts. Proper cuts
ensure tight seals and prevent leaks. When you
cut the tube the right way, you end up with
accurate cuts without a deformed tube.  Keep all
tubing ends smooth  Your 3/16 brake line is
enhanced by tight tube seals. This is made
possible by smooth edges after cutting the tubes.
Always ensure smooth tube ends by removing all
rough edges after cutting. Rough edges can cause
leaks as they interfere with the sealed
surfaces. 
Copyright by thestopshop.com
4

• Ensure that tubes are flared properly
• It is important to flare tubing with recommended
  techniques. Manufacturers usually provide
  elaborate instructions for proper flaring of
  tubing material. Not following property flaring
  guidelines can cause weak connections, leaks, and
  so on. Make sure to have a uniform flare that
  meets standard specifications before fixing the
  fitting.
•  
• Tighten the flare fitting with care
• It is important to use the right tool to ensure
  that the flare fitting is tightened properly. For
  this, you may want to use a flare wrench which
  helps prevent damage to the nut. Follow the
  provided torque instructions during the
  tightening process for desirable results. 
•  
• Ensure regular maintenance routines
• After fixing your inverted flare fittings, it
  will need regular maintenance. Ensure that you
  conduct maintenance checks on the component
  regularly. This help you confirm that the
  connection is in good condition. In addition, you
  should regularly check the connection for
  damages, wear, or corrosion. 

Copyright by thestopshop.com