How We Fixed Roku Volume Not Working

1
HOW TO FIX THE ROKU VOLUME NOT WORKING?
2
Roku is a smart streaming device that lets users
stream movies, TV shows, music, and YouTube
videos, with an active and working internet
connection. But what if you encounter issues
unexpectedly with it? Many users have reported
that they are struggling with the Roku volume not
working issue. If you are also having the same
problem and wondering how to fix it, then this is
the last stop for all your wonders. Although many
reasons can lead to the same problem, the good
thing is that this problem can be fixed. To
resolve this, all you need to do is follow the
below problem-solving resolutions. This problem
usually occurs due to bad configuration or
hardware failure of the TV remote. It often
occurs when you try to control the volume of the
TV through the Roku remote but sometimes it fails
to work with the TV. If you dont know how to
troubleshoot it, then you arrived at the correct
destination. In this article, you will get an
easy and brief guide on how to fix the Roku
volume is not working issue. Simply have a look
at the following section.
3
Why is Roku Volume Not Working?

• Before jumping to resolutions, you should get
  familiar with the causes of the problem. Below is
  the list of common causes that can lead to the
  Roku volume not working problem.
• Faulty batteries on the remote.
• Outdated firmware of the Roku device.
• Hardware failure of Roku or TV.
• Corrupt firmware of the Roku device.
• The Remote is unable to pass the signal properly
  to the TV.

4
Steps to Troubleshoot the Roku Volume is Not
Working

• 1. Check the Roku Remote and TV
• On your phone, turn on the flashlight and point
  it to the IR output of the remote.
• Now check if the light beams out of the IR unit,
  by pressing the volume up or down button.
• If not, then either the remote or the batteries
  are faulty and the remote might have a hardware
  problem.
• Or if you see a constant IR beam in the camera of
  the phone, then the button might get stuck in the
  pressed position, or the remote is
  short-circuited.
• If the remote is working properly, then you
  should check if another remote can control the
  volume.
• The problem might be with the IR unit of the TV,
  in another remote also not working. Simply check
  for any hardware problems.

5
2. Replace the Batteries

• The next method to resolve the Roku volume is not
  working is to replace the batteries with fresh
  ones. The batteries in the remote may be dead and
  fail to work properly. So, it is recommended to
  substitute the batteries, below are the
  instructions to replace the batteries.
• Open the back cover of the Roku remote and you
  need to remove the batteries.
• After this, place new batteries into the battery
  compartment.
• Then check whether the remote has started to work
  properly.
• If it is not, then use the original remote to
  control the volume on the TV.
• At last, check if the problem is solved or not.

6
3. Re-pair the Remote to the Device

• If still struggling with the Roku volume not
  working then try to repair the remote. It is
  possible that the problem might be occurring due
  to a temporary glitch in the device. Below is how
  re-pairing the remote with the device may solve
  the problem.
• Visit Roku Settings and head over to Remotes
  Devices.
• Then choose Set up a New Device and click on
  Remote.
• Next, click on Pair and press the pair button on
  the remote.
• If it gets paired successfully, you will see the
  green light.
• Once paired, check if the volume button is
  working properly.
• If it is not, then visit the Home screen and
  remove the batteries from the remote.
• Then put back the batteries and press the pairing
  button, for five seconds.
• If any prompt appears on the screen, follow it
  and pair the remote with the TV.

7
4. Update the Firmware of the Roku

• Last but not least, update the firmware to
  rectify Roku volume is not working. Outdated
  firmware can also make your remote ideal and not
  work properly. So, it is recommended to update
  the firmware. Here is how to update the firmware
  of the Roku.
• Go to Roku device Settings and launch the System
  tab.
• Next, choose System Update and click on Check
  Now.
• If any update is available, confirm the update
  and wait till the process gets completed.
• Once completed successfully, the Roku device will
  restart. When the restart is finished check if
  the remote is working well or not.

8
Sum up
Hope the above methods will help you in
rectifying the Roku volume is not working. The
above effortless and effective resolutions work
well in most cases. Especially when the issue is
generated due to system corruption. To get rid of
the Roku volume not working issue, all you need
to do is follow the above steps as given.
9
www.dolphintechknology.com
10
THANK YOU