What To Do If My Washing Machine Does Not Spin

1
What To Do If My Washing Machine Does Not Spin
2
What To Do If My Washing Machine Does Not Spin
3
WASHING MACHINE REPARI SERVICE

• The door handle of a washing machine is a very
  fragile part. Therefore, if it has broken or
  gives you problems and sometimes even does not
  allow you to open the door to put your clothes in
  or out, you will want to change the door lock of
  the top-loading washing machine. And it's very
  simple.
• Although if you don't know how to do it, it may
  take several hours. Therefore, it is important
  that you have the right tools and that you follow
  the steps that we teach you one by one.

4
WASHING MACHINE REPARI SERVICE

• How does a top-load washing machine door latch
  work?
• The door handle of the washing machine can wear
  out over the years. It is very common for one of
  its parts to wear out or simply break inside. In
  fact, its break in most cases is not visible.
• In most cases, this break appears after a little
  struggle with the door and in many cases due to a
  too-strong pull.
• For this reason, it is always recommended that
  you wait a few minutes to make sure that you can
  open the door calmly and without incident.

5
WASHING MACHINE REPARI SERVICE

• Causes of the problem in closing the top-loading
  washing machine
• Replacing the door lock on a top-loading washing
  machine can be quite tricky if you don't know
  exactly what caused it or where the problem is.
• Sometimes the break is internal and in others,
  there is a blockage. However, if you can't figure
  out why, don't worry, there are some steps you
  can take to fix the shooter issue even if you
  don't know the problem.
• What you need before changing the lock on your
  washing machine door
• But before you start you have to prepare
  yourself. What do you need to change the door
  lock of the top-loading washing machine? Not
  much.
• In principle, a screwdriver or wrench (preferably
  both) and pliers are enough.
• All three are cheap and easy-to-acquire tools.
  Plus you don't need anyone else's help.
• But in addition, you probably should buy a spring
  and a shaft to replace the ones on the inside of
  your washing machine door.

6
WASHING MACHINE REPARI SERVICE

• Steps to change the top-loading washer door lock
• To change the door lock on a top-loading washer,
  you always have to remove the door. This also
  applies to front-loading washing machines.
• Step 1
• First of all, you have to loosen the screws on
  the door, which are usually small, so you will
  need a screwdriver for these measurements. Then,
  slightly lift the door before unscrewing it
  completely. Then the hinge will come loose.
• Step 2
• When the hinge is loose you have to loosen the
  screws on the inside of the door. This is done
  later because you didn't have access before.
• Well, now you can remove the metal or glass part
  and you can finally completely separate the
  handle or handle from the door.

7
WASHING MACHINE REPARI SERVICE

• Step 3
• Now what you have to do is extract the
  innerspring and its axis. Probably this is the
  one that has broken its operation. What you
  should do is replace them with new ones. This is
  very easy but you need to make sure that the
  smaller tab on the inside fits snugly into the
  slot. If this were not the case, problems could
  arise again. Once you have changed them, return
  everything to its previous state. That is, you
  must put the metal or glass part back in its
  place and also place the interior frame. Then
  correctly place the lever handle on the frame and
  of course check that it moves and rotates
  correctly without forcing. It is also good that
  you notice that there is dampness.
• Step 4
• When you have verified that everything works
  correctly, it is time to screw. Just place the
  door of your top-loading washing machine in the
  correct position and start screwing. The best
  thing is that you do it with a screwdriver of the
  appropriate measures.

8
WASHING MACHINE REPARI SERVICE

• Conclusion how to change the top-loading washing
  machine door lock in a few minutes
• Changing the door lock on your top-loading washer
  is easy. At most, it will take you 20 minutes.
  The most important thing is that you have the
  right tools, that you find replacements for the
  spring, and finally that you have patience. If
  you follow the steps you can repair it in less
  than half an hour. Although if you don't know how
  to do it, it may take several hours. Therefore,
  it is important that you have the right tools and
  that you follow the steps that we teach you one
  by one.

9
ADDRESS

• Name Prepare Service
• Address No. 2/18, Kannika Nagar, TVS Nagar Road,
  Kavundampalayam, Coimbatore 641030
• Mobile [phone]
• E-mail prepareservice_at_gmail.com
• Website https//prepareservice.in/