DYMO REPAIR SERVICE CENTER

1
Dymo LabelWriter 450 Troubleshooting

• With very little upkeep, your LabelWriter printer
  should provide years of trouble-free printing.
  But if you do run into trouble, this article
  offers advice on how to fix issues that can arise
  when using the printer. Try our comprehensive
  array of LabelWriter technical articles, give us
  a call, or get in touch with DYMO Service
  Center if you cant figure out an issue. Visit
  Link - Repair Service Center

2
Status Light

• The status light visibly displays the printers
  condition right now
• - Solid Blue The printer is ready and the power
  is on.- Dimmed Blue Power-saving mode for the
  printer.- Flashing Blue Incorrect label loading
  or an empty label roll.

3
Performing a Printer Self-Test

• Perform a printer self-test if you encounter
  issues with broken characters or other print
  quality concerns. The self-test demonstrates that
  every component of the print head and printing
  process is functional.
• To perform a self-test
• 1. Press and hold the form-feed button on the
  front of the printer for five to ten seconds with
  a roll of labels inside. Along its width, the
  printer starts printing vertical lines. Every 3/4
  inches, the test pattern automatically modifies
  (19 mm).2. Release the form-feed button once the
  self-test has started.3. Press and hold the
  form-feed button to halt the self-test.

4
Clearing Label Jams

• In order to unclog labels that have gotten stuck
  in the printer1. Remove any labels that have
  already been printed by tearing them off.2. Pull
  the stuck label from the label feed slot by
  pushing the label release lever forward.

5
Correcting Poor Print Quality

• One of the following factors most usually
  contributes to poor print qualityAn outdated
  roll of labels
• - Labels produced by a company other than DYMO-
  Labels with a damaged thermal coating A filthy
  print head

6

• DYMO gives DYMO REPAIR SERVICE CENTER and user
  support for all their products. If you have a
  problem using a DYMO product or when the product
  is broken, please contact DYMO directly. Their
  Helpdesk is available for all countries. The DYMO
  Helpdesk will decide how to deal with your broken
  product.
• The DYMO Helpdesk contact details for your
  country are available on the website www.dymoservi
  ce.com. You can have support via phone, email and
  chat. You can used this website also to register
  a defect product.
• We advice you to use the chat function first,
  that is often faster than calling the helpdesk by
  phone.
• ADDRESS
• USA
• MOBILE
• 1 [phone]
• SEND US AN E-MAIL
• support_at_repair-service-center.com
• OUR WEBSITE
• www.repair-service-center.com