Techniques used for corrosion removal

1
Which Techniques are used for Corrosion
Removal?
byEuroblast Middle East LLC
2
Techniques for corrosion removal

• There are numerous corrosion removal techniques
  available.
• Once you find the type of damage, you can select
  the best corrosion removal technique, abrasive
  method, and treatment tools for your needs.
• Before beginning any corrosion removal technique,
  ensure that you have the necessary safety
  equipment, including eye, skin, and respiratory
  protection.

3
Corrosion Damage Assessment

• The first step classify the level of damage. This
  is accomplished by thoroughly cleaning and
  inspecting the area.

4
The following are the categorization criteria

• Light corrosion 0.001-inch-thick peripheral
  damage that appears as pitting or discolouration
  can be removed with light sanding, polishing, or
  chemical treatment.
• Moderate corrosion similar to light corrosion,
  but with a thickness/depth of up to 0.010 inch
  and signs of blistering, scaling or flaking that
  can be repaired with manual or power sanding.
• Severe corrosion pitting deeper than 0.010
  inches, as well as blistering, scaling, flaking,
  or exfoliation that necessitates extensive
  power-sanding and grinding.

Corrosion below the "light" level may be
considered allowable damage that does not require
immediate repair.
5

• Techniques for Removing Corrosion Damage
• The removal technique is chosen based on the
  severity of the damage.
• Mechanical removal using an abrasives tool is
  usually chosen because it is the most effective
  and efficient solution.
• Abrasive methods can be either by hand or
  power-operated.

6
Techniques for removing corrosion from Hand

• It is best suited for less severe damage, such as
  light corrosion. Often, these minor issues can be
  quickly resolved with abrasive paper or abrasive
  wool. These solutions are also useful for oddly
  shaped parts, tubing, or other equipment that
  protrudes from a more uniform surface.
• Abrasive Paper Mats
• It is typically filled with silicon carbide or
  aluminium oxide abrasive particles.
• When accessing corrosion with power tools are
  difficult or only a small amount of corrosion
  needs to be removed.

7
Techniques for removing corrosion from Hand

• Wire Brushes
• Used to remove heavy corrosion deposits.
• Brushes with aluminium or stainless steel
  bristles can be used on aluminium.
• After wire brushing, the areas may need to be
  polished with fine abrasive paper in the case of
  aluminium.
• Abrasive Wool
• Typically, abrasive wool is used to remove
  lighter corrosion deposits.
• Aluminum, steel, and stainless-steel wool are
  available, and the type of wool must match the
  base material.

8
Techniques for removing corrosion from Hand

• Scrapers
• Scrapers are used to move an initial layer of
  heavy corrosion, but they must be used with
  caution so as not to damage the base material.
• This is especially true for softer materials such
  as aluminium. Aluminium can be scraped with
  aluminium, plastic, and carbide-tipped scrapers.
  Steel can be scraped with carbide-tipped and
  steel scrapers.
• Pumice Powder
• Used when very low material removal rates are
  required.
• The powder is combined with water and applied to
  the surface using a cloth.
• This method works best on softer materials.

9
2. Powerful Corrosion Removal Methods

• Powered tools are used to repair more severe
  corrosion or damage over a larger area.
• The main advantage is their ability to cover
  large surface areas quickly.
• To avoid overheating, the metal must be allowed
  to cool regularly. Power sanding risks are
  reduced through proper training and safety
  education.

10

• Rotary File
• Because this tool can remove a large amount of
  material in a short period, it should only be
  used by experienced technicians in the most
  extreme cases.
• Abrasive Blast Media
• Abrasive media comes in aluminium oxide and glass
  beads and is ideal for heavily corroded areas.
• Radial Bristle Disc
• This is useful for removing stubborn corrosion.
  This is only advised for use on aluminium,
  high-strength steel, titanium, and magnesium
  alloys. Other materials may be harmed by radial
  brushes.
• Flap Wheel
• These can be used to remove small amounts of
  material, but they must be used with caution
  because improper use can result in large material
  removal rates.

11

• Regardless of your best efforts to prevent
  corrosion, some will always occur over time due
  to exposure to environmental risk factors.
• Knowing the different types of corrosion will
  allow you to use the best corrosion removal
  techniques to solve the problem economically and
  efficiently.
• Contact an Euroblast Middle East LLC today to
  learn more about corrosion removal in Dubai
  processes and how to combat them.

12
Contact Us Euroblast Middle East LLC Email
info_at_euroblastme.com Contact number 971
42824400 Website https//www.euroblastme.com Ad
dress P.O Box 31230, Dubai, United Arab Emirates