How To Reset Your Volvo XC60 Check Engine Light - PowerPoint PPT Presentation

About This Presentation
Title:

How To Reset Your Volvo XC60 Check Engine Light

Description:

If your Volvo XC60 check engine light is on, it indicates that there’s something wrong with the engine. Turn a blind eye to it, you can put the powertrain of your car in jeopardy. Therefore, if your check engine light is illuminating, take your vehicle to a nearby auto repair shop without delay. – PowerPoint PPT presentation

Number of Views:11
Slides: 29
Provided by: dellsservicecenter
Category:
Tags:

less

Transcript and Presenter's Notes

Title: How To Reset Your Volvo XC60 Check Engine Light


1
How To Reset Your Volvo XC60 Check Engine Light?
2
Lit-up check engine light (CEL) warns you that
something is wrong with your car.
3
Below, weve rounded up some reasons why your
Volvo XC60 CEL may come on.
4
Is your Volvo XC60 check engine light on?- Heres
why
5
Gas Cap Is Faulty
6
One of the prime reason why your CEL may come on
is- a faulty gas cap.
7
Gas cap is designed to prevent unwanted loss of
fuel vapors from the gas tank.
8
Faulty gas cap in your Volvo XC60 can set off the
check engine light.
9
Problematic Catalytic Converter
10
Another major issue that can set off your CEL is-
a faulty catalytic converter.
11
Therefore, if your Volvos CEL is on, the first
thing you should do is to check its catalytic
converter.
12
Failing Ignition System
13
Sparks generated by the ignition system ignites
the air-fuel mixture within the cylinder.
14
Improper spark plug firing due to flaws in the
system can trigger the CEL in your car.
15
Disproportionate Air-Fuel Ratio
16
Rough engine performance due to imbalanced
air-fuel ratio can also prompt your car computer
to set off the CEL.
17
Issue With The Sensors
18
The ECU relies on a series of sensors to control
the engine operation.
19
Faulty sensors may interfere with the engine
operation, causing the CEL light to come on.
20
Volvo XC60 check engine light- How to reset it?
21
Its very simple. Heres how you can do that-
  • Use an OBD-II scanner to retrieve the error code
    stored in the computer.
  • Then, take suitable measures to diagnose the
    issue further.

22
You can also erase the error code to reset the
CEL light in your car.
23
And to do that, you just have to disconnect your
car battery for a moment.
24
You can also erase the error code with the help
of an OBD-II scanner.
25
Endnote
26
The check engine light in your car may come on
due to a variety of reasons.
27
You can use an OBD-II scanner to diagnose and fix
the problem.
28
DELLS
SERVICE CENTER
https//dellsservicecenter.com/
/DellsServiceCenter/
Write a Comment
User Comments (0)
About PowerShow.com