Top 3 Safety Practices for Plasma Cutting

1
Top 3 Cutting
sales_at_altparts.com
Safety Practices for Plasma

• Plasma cutting is one of the most simple,
  popular, and economical cutting methods. But if
  not handled with care, it will lead to
  unexpected severe hazards. So, to reap its
  benefits and increase productivity without any
  accidents, you should follow some safety
  practices. The foremost safety step to take is
  investing in good quality machine parts like
  Mazak parts, Mitsubishi machine parts, Amada
  plasma cutting parts, etc. Here we will have a
  brief look at the top three plasma cutting safety
  tips that one must follow

www.altparts.com
2
sales_at_altparts.com
1. Fire Safety In the plasma cutting process,
preventing fire should be on the top of your
safety checklist. It is because the plasma
cutting arc blows hot metals and sparks out. It
can even heat up by cutting the torch and
workpiece that may cause fire and burns. Also,
ensure you are keeping your eyes safe while
performing plasma cutting. And how can you do
it? With the help of safety glasses having a side
shield. You can even use a helmet or a face
shield with safety glasses for more
protection. You can also protect your body from
harmful flying sparks and hot metal with the
help of dry undamaged flame-resistant gloves and
clothes. You can choose clothes made from tightly
woven materials such as wool, leather, heavy
denim, etc. You should also button your shirt
collars to stop them from catching fire. You
should avoid wearing cuffed pants as they can
catch sparks. And to protect your feet from the
fire, you should wear the best quality leather
shoes and boots.
www.altparts.com
3
sales_at_altparts.com
The plasma can be so hot that it can even cut
through the gloves and skin. Thus, to prevent
this injury, you must avoid gripping material
near the cutting path. 2. Proper
Ventilation Similar to welding, plasma cutting
also produces fumes and gases. And breathing
them might mess with your health. You can
prevent this health hazard by ensuring proper
ventilation in the space where machines are
working using fume extraction systems and
respirators. You can even use a welding
respirator while using a plasma cutter in a
confined space. In situations when the airflow
of your working machine room is restricted, then
you can use a welding fume extractor.
Additionally, ensure that you comply with the
codes and standards of your area.
www.altparts.com
4
sales_at_altparts.com When you cut coated metals
such as cadmium-plated steel or galvanized
steel, you should remove the coating from the
cutting area. These coatings release toxic fumes
when they are cut with the plasma arc. You can
use the suction system and exhaust hood at the
arc to ventilate the cutting area while cutting
the coated metals. This will keep the area free
of fumes and safe to breathe. 3. Avoid
Electric Shocks Manufacturers connect plasma arc
with an electric circuit between a workpiece and
a torch. This means that if you touch the torch
or the workpiece when the plasma cutter is
operating, you might end up with a fatal
electric shock through your body. Additionally,
plasma cutters need compressed gas and high
voltage to cut steel and electrically conductive
metals. To give you a perspective, the plasma
cutter voltages are in the range of 100-200
Volts, and that is way higher than welding
voltages.
www.altparts.com
5
sales_at_altparts.com

• You can follow the below safety practices for
  saving yourself from electric shocks
• Do not remove the ground clamps when the plasma
  cutting process progresses.
• Wear insulated boots and gloves to keep your body
  dry and safe from electric shocks.
• Do not remove the ground cable that is attached
  to the workpiece during the cutting process.
• Do not stand, sit, or lie on the wet floor while
  the plasma cutting process is going on. Instead,
  choose a rubber mat to prevent electrical shocks.

www.altparts.com
6
sales_at_altparts.com
Conclusion I hope the safety practices mentioned
earlier may help you to carry out plasma cutting
devoid of accidents or any injuries. You must
remember, the key here is to identify the risks
and eliminate them with necessary safety
measures. To ensure additional safety, you can
use high-quality Mazak parts and Mitsubishi
machine parts. By following these safety
measures, you can not only eliminate the
accidents but also ensure growth and
productivity.
Source https//justpaste.it/5w9yv
www.altparts.com