Simple Steps for Making a DIY Dog Rope Toy - PowerPoint PPT Presentation

About This Presentation
Title:

Simple Steps for Making a DIY Dog Rope Toy

Description:

Diy dog rope toy act as tooth floss, keeping dogs' teeth clean. Rope toys are also beneficial because they can massage your dog's gums, remove food particles stuck in their teeth, and thus reduce the likelihood of harmful bacteria or plaque forming on their teeth. – PowerPoint PPT presentation

Number of Views:23
Slides: 8
Provided by: toebeans
Category:

less

Transcript and Presenter's Notes

Title: Simple Steps for Making a DIY Dog Rope Toy


1
Simple Steps for Making a DIY Dog Rope Toy
Make a high-quality DIY Dog Rope Toy by
following these simple steps below and letting
the bond between you and your dog grow. We can
guarantee you that after making a toy for your
dog that we are pretty sure will be their
favorite, you will feel satisfied and happy too.
2
Steps for making a DIY dog rope toy
Materials- First and most important step is you
need a rope at least 10.5 feet, or it can be a
bit longer but not too long otherwise, it will
lose its aesthetics. Start with a braid on each
end.
3
Monkey first knot
A monkey fist knot is three turns of rope, three
more turns around the first three, and a final
set of three more turns locking them all
together. Maybe it does a little bit difficult,
but you start doing it, you will not feel it,
because it's fun. The initial knot has to be
pretty loose otherwise, you will never be able
to feed the last three loops through the knot.
Start at one end of the knot when you start
tightening the rope. Now push/pull the loop
through the entire knot, pulling the loops
tighter as you go.
4
Cleaning up the rope ends
Cleaning up the rope ends - after the knots are
accomplished, remove some of the rope core
before fusing the ends of the rope. Expose the
core by pulling the braided covering back from
the end. You can cut off an inch or so of the
core, and after that, make the rope more durable
by fusing the covering you can use a lighter.
5
Braid knot the rope ends. If you want to do no
more work and want your dog to play with it, you
can do so, but making a braided knot out of each
end of the rope makes a better/thicker handle
for the toy. Start braiding the three strands
near the monkey first knot as you bring the other
end of the rope to become tangled - after a few
plaits, stop to untangle the ends, then continue
braiding.
6
Play - The last and far more important step for
you and your dog to do with the DIY dog rope toy
is to start playing with it as soon as possible.
visit
For High Quality and fun, Dog toys toebeans.com
and order one for your dog now.
7
Contact us
1390 Chain Bridge Road A168 McLean, VA
22101 Virginia 7195261 Ph (888)
474-0030 inquiries_at_toe-beans.com
www.toe-beans.com
Write a Comment
User Comments (0)
About PowerShow.com