Metal lock crack repair process in Gurgaon

1
Welcome To Our RA Power Solution Website

• Metalstitchinglocking

2
Metal lock crack repair process in Gurgaon
We specialise in cast iron repairs. Cast iron
components develop cracks for a variety of
reasons or incidents. The cast iron components
can be broken into pieces in some situations.
There is no need to reject or replace the part.
Metal stitching and metal locking processes can
now be used to repair cast iron on-site. In fact,
on-site cast iron repair using metal stitching
and metal lock is the only way to mend cracks in
cast iron components and save a component that
would otherwise be rejected owing to the crack or
severe damage into many parts. Cracks in cast
iron were formerly repaired using an outdated
traditional welding procedure that is no longer
used in the industry since the outcomes of
welding are not always satisfactory. RA Power
Solutions undertakes onsite cast iron repairs,
repair of aluminium and cast steel casting.
3
All the repairs are undertaken by a cold process.
The main advantages are as follows-
Benefits of cast iron repair, aluminium casting
and steel casting repair by metal lock and metal
stitching-

• Cast iron repair and damage casting repair is
  possible on site and there is no requirement of
  disassembly of the damaged component from the
  main equipment and sending it to the designated
  workshop.

Metal Locking
4

• The metal stitching and metal locking process
  followed by RA Power Solutions for the repair of
  a crack in the casting of grey iron, steel
  casting or aluminium is a cold process and no
  heat is generated.
• There is no loss of alignment or modification in
  the original profile of the component because the
  cast iron repair by metal stitching and metal
  locking is a cold process.
• After the damage or crack casting is rectified,
  most of the time no machining is required. In
  comparison to the welding procedure used by a few
  companies for crack repair, this is a significant
  advantage.
• The cast iron crack repair by metal stitching and
  metal locking process restores to its original
  strength of the casting and is watertight and
  gas-tight repair.
• The cast iron crack repairs are executed in
  minimum time reducing drastically the downtime of
  the equipment and the plant in totality.

5
The applications for repair of a crack in the
casting of grey iron, steel casting or aluminium
few which are mentioned below-

• Repair of the crack engine block, inspection
  window, liner sitting area in entablature etc.
• Repair of damaged cylinder liners, pistons,
  cylinder heads and turbine casing.
• Repair of damaged heavy industrial machinery.
• Repair of the damaged gearbox, pump casings
  manufactured of Aluminium, cast steel and grey
  cast iron.

We can broadly say that all types of cracks in
cast iron, aluminium casting and steel casting
can be successfully repaired.
6
Visit Us https//metalstitchinglocking.com/ Ema
il Id rajshahani_at_rapowersolutions.com Contact
us 91 9582647131, 91-1244378292,
91-124-4251615