EverlastCanada

1
Quality Of A Plasma Cutter
2
The use of a plasma cutter in the welding
industry ensures precise output, however, the
quality of cut can vary depending on the
properties of the metal and how the welder uses
it during the process. Therefore, the accuracy of
the plasma cutting technology depends on
mechanical factors like features of the plasma
tools, how it is set up, and also the expertise
of the welder. Due to the easy mechanism, an
operator can easily access the functions of the
plasma cutting tools for the efficient and
accurate fabrication of the metal.
3
Determine The Kerf Width of Plasma Cutters
The Kerf is the material that is removed from the
metal by the cutting process of the plasma
cutter. In trhe plasma cutting process, Kerf
width is primarily evaluated by the ampeage of
the plasma cut process. The basic thumb rule is,
lower amperage of the plasma will produce a
narrow kerf whereas, higher amperage will produce
a wider kerf. To obtain the best cut quality in
terms of Kerf width, make sure the plasma
cutter operates on lower amperage to cut any
thickness of the metal.
4
Bevel Determine The Cut Quality Of Plasma
Cutting Tool
Bevel is a top to bottom variation of the cut
produce by the plasma tool. Whereas, positive
bevel highlight that the bottom edge of the cut
on the metal is protruding, negative bevel, on
the other hand, determines that the top edge of
the cut is protruding. In the plasma cutting
process, the major reason behind the unintended
proportion of the bevel is inaccurate cut height.
When the height of the cut is too high, a
positive bevel will appear whereas, on low cut
height, a negative bevel will appear.
5
Quality Cut for Creating a Round Edge
Edge rounding in welding is the slight curve that
occurs at the edge of a cut part. It is somewhere
similar to a bevel and takes a round-finish shape
instead of a sharp shape. However, top edge
rounding in metals, usually occurs when plasma
cutters creates higher cut height. In plasma
cutting, top edge rounding of metals are normal
and it can become excessive due to factors like
improper cut height, inaccurate gas pressure, and
worn consumables.
Source- https//articleebook.com/how-to-determine
-the-cutting-quality-of-a-plasma-cutter/
6
Contact US
For More Information Visit our websitehttps//ww
w.everlastwelders.ca/products/plasmacutters.php
Email- sales_at_everlastwelders.ca Phone
905-570-1818
7
Thank You