A Guidance About Dynacord Amplifiers

1
A Guidance About Dynacord Amplifiers
2
Power amplifiers form a major part of any event
in todays time. A good amplifier works like
nothing else for a big event or party. The sole
responsibility of driving PA speakers and
microphones in the correct way is on the power
amplifier.

So, without it converting electronic signals into
sound waves, the party would not be successful.
You need to consider a few things first to
understand what kind of an amplifier you need for
your event. A Dynacord sound system is something
to look out for.
3
Active or Passive

• In the active or powered amplifiers, the speakers
  and the amp are housed together in a single unit.
  However, in PA systems, the single power
  amplifiers are the driving force behind the
  speakers and monitors.

4

• The unpowered versions are better if you want the
  sound system to grow with time.
• The one with the single unit can be a little
  tricky to deal with.
• This is because if the amp gets damaged in any
  way, you might have to replace the entire system.
  
• It will cost you more than you would intend to
  spend.

5
Power Specifications

• The most important task of a power amplifier is
  the kind of power it can provide. In most cases,
  the power is measured differently, but always in
  watts. There are two kinds of them.

6

• Peak watts that are used to measure the minimum
  power that the amplifier can provide at a point.
• Continuous watts are used to measure the average
  amount of watts that the amplifier can provide at
  the maximum.
• Each user manual will have a different
  measurement standard on them. So, read it
  carefully before you make a choice. It is a bad
  idea to ever try to compare these two kinds of
  watts because they cannot be judged by the same
  standards.

7
Modes

• An amplifier has multiple modes that you need to
  learn about. These configurations can be adjusted
  according to your needs.
• In the Stereo mode, a stereo soundstage is
  created by connecting the right and left outputs
  to the amplifier.
• In the Parallel mode, the output source remains
  one and is connected to the amps channels.
  Source

8
Contact Us

• ABU DHABI
• Behind Royal Rose Hotel, Electra Street
• Abu Dhabi.
• Telephone [phone]
• WhatsApp No 056 9923000
• E-mail info_at_gulfstreaminfotech.com

• DUBAI
• Silicon Oasis
• Telephone [phone]
• E-mail aj_at_gulfstreaminfotech .com

9
www.gulfstreaminfotech.com