Radio Remote control for EOT cranes in India (1)

1
FEATURES OF RADIO REMOTE CONTROL
ANAND SYSTEMS ENGINEERING PVT. LTD.
TANDEM MODE
Tandem mode is operated with the help of a
Selector Switch. During Tandem mode, the Anand
Remote is synchronized with two or more
receivers. Movements of both the cranes are
synchronized and as soon as one crane receiver
stops responding and other crane receiver is
given a stop command for safety reasons.
CUSTOMIZED RADIO RANGE Anand Remotes have the
ability to transmit and receive at a range of
more than 200 meters line of sight at full
power. Software programmed to have a custom range
from 10meters up to 200 meters according to user
requirement without changing any hardware. Anand
Remotes have been designed from the ground up to
transmit signals over long distances at the
lowest power possible. CLOSED LOOP
COMMUNICATION Advanced closed loop communication
between transmitter and receiver. Wheneveryou
want to reliable communication between the
transmitter and receiver you require feedback.
HIGHLY CONFIGURABLE RECEIVER 2 to 18 Relays. 30
milli Watt Idle Power Consumption. After 10 Idle
minutes Receiver Switched Off all Relays and
goes into ultra low power consumption mode to
save on electricity costs. Operation indicators
to see status from 200 meters distance. Power
Indicating Lamp Signal Received Indication Main
line contactor On/Off Indicator
DIGITAL ADDRESS All Radio systems have
configurable 8 Byte Digital Address. A digital
address is assigned to each remote control and
receiver instead of tuning crystals present in
old technology remote controls.
https//www.anandcontrol.in/radio-
remote-control/anand-remote.html