Common Underground Utility Location Services - PowerPoint PPT Presentation

About This Presentation
Title:

Common Underground Utility Location Services

Description:

Underground Utility Location Services Bay Area by Exaro Technology comply with the environment protocols while performing the task efficiently. Our experienced teams utilize the most advanced technology to ensure superior quality subsurface utility identification. – PowerPoint PPT presentation

Number of Views:148

less

Transcript and Presenter's Notes

Title: Common Underground Utility Location Services


1
Common Underground Utility Location Services
  • EXARO Technologies Corporation

2
  • During a construction project which involves
    digging and excavating, it is critical to have
    your utilities located before you dig. This will
    help you save time budget, and also the cost of
    dealing with a damaged utility. Looking broadly,
    a damaged utility might pose hazards for the
    environment too. Therefore, underground utility
    location services are required. This article
    discusses different methods available to locate
    utilities.
  • Broadly speaking, the areas of focus within this
    article are electromagnetic utility locating,
    ground-penetrating radar, acoustic utility
    locator, hydro excavation, and even dowsing.

3
Electromagnetic Utility Locating
  • It is the most commonly used method to locate
    private utilities. In electromagnetic underground
    utility location service, the locators generate
    an electromagnetic radio frequency. When applied
    to the ground, the waves detect the underground
    utilities containing conductive material on a
    receiver.
  • This method is very popular for its accuracy to
    detect a wide range of utilities including gas,
    electricity, water, storm, telephone, irrigation,
    cable, propane, and sewer lines. Electromagnetic
    utility locator cannot, however, detect or locate
    concrete, plastics, asbestos, terra-cotta, or
    non-ductile pipes.
  • Gas lines are generally locatable because of the
    material used in their manufacturing. Medium or
    high-density polyethylene pipe, or plastic,
    allows the locator to detect because commonly a
    tracer wire runs alongside or on top of the
    pipeline, making it easy to locate. With the help
    of a tracer wire box or other system, a current
    can be induced making it possible to locate the
    tracer wire.
  • This technology works great in depth of 10-15
    feet, whereas normally natural gas distribution
    lines are installed within 4 feet underground.
    Transmission lines are installed deeper than the
    gas lines, but it rather unusual for any utility
    line to be buried beyond a depth of 10 feet.

4
Ground Penetrating Radar
  • GPR (Ground Penetrating Radar) is a technology
    used for underground utility location services.
    This technology is also based on high-frequency
    pulses. A GPR emits radio waves into the ground,
    which are deflected back by the facilities
    subsurface. The deflected radio waves travel back
    to the operator, and display the objects on the
    equipment.
  • GPR is popular for locating buried utilities like
    cables, pipes, manholes, tanks, and other buried
    objects that cannot be located with other more
    common methods, such as electromagnetic locating.
  • There are certain limitations to this method of
    underground utility location service. The biggest
    challenge is that in order to operate a GPR
    sufficient experience, training and expertise are
    required, so that the results can be interpreted
    accurately. Other than this some soils such as
    saline, shale, or clay have high conductivity,
    which limits the GPR from penetrating the soil.
    Moreover, High-frequency GPR antennas offer a
    limited penetration. Other factors which affect
    GPRs effectiveness include soil density,
    environment accessibility, and crowding of
    surrounding utilities.

5
Hydro or Vacuum Excavation (potholing)
  • While other utility locators require digging,
    vacuum excavation, also known as potholing, is
    non-destructive way to safely locate and expose
    underground utilities. It is comparatively fast
    as well. In this underground utility location
    service, high-pressure air is used to break up
    the soil, which is then sucked into a tank. This
    method is perfect for excavating in difficult
    soil conditions. Vacuum excavation also goes by
    names hydro-digging, hydro-trenching, or soft
    digging.

6
Dowsing
  • Although dowsing is not recognized as an
    efficient locator service for larger utilities,
    but it considered as one the most reliable ways
    to locate underground utilities and water by many
    experienced locators. With one drawback of
    inability to indicate the depth of a utility
    underground, dowsing rods can indicate accurately
    if you are standing on top of an active pipeline.
    Dowsing can be made from coat hangers, and many
    experienced locators find it a reliable way to
    locate pipelines. Many skeptics claim this method
    is based on intuition, and there is no science
    working behind this method. Whatever the beliefs
    various groups of people hold, the fact remains
    that dowsing has been used as a reliable method
    to detect underground water since the Middle Ages.

7
EXARO Technologies Corporation
  • Underground Utility Location Services Bay Area by
    Exaro Technology CO comply with the environment
    protocols while performing the task efficiently.
    Our experienced teams utilize the most advanced
    technology to ensure superior quality subsurface
    utility identification. To know more about our
    services, get in touch with one of our
    representatives today or visit our website.

8
THANK YOU
Write a Comment
User Comments (0)
About PowerShow.com