Custom Printing 3d T-shirts – Understanding The Most Important Aspects

1
(No Transcript)
2

• Learning The Basics Of 3-D T-Shirt Printing
• It is a well-acknowledged fact that 3-D printing
  has revolutionized the process of creating custom
  t-shirts. It has simplified the designing and
  printing of this extremely popular item of
  clothing and getting pleasing results in a much
  effortless manner. It is possible to create 100s
  of uniquely designed t-shirts within a matter of
  hours using this technology, which makes it a
  highly cost-effective option as compared to other
  printing techniques. 

3

• Essential Items Needed To Create 3-D Printed
  Custom T-Shirts
• As mentioned before, creating custom printed
  t-shirts is relatively simpler using the 3-D
  printing technique. The most essential items
  required to complete the process and create truly
  awe-inspiring and stylish tees using this
  technique include the following.

4

• T-Shirt
• The t-shirts on which the 3-D design is to be
  printed are the basic item required for
  completing the process. 3-D printing works on a
  wide range of fabrics including those crafted
  from 100 pure cotton, 100 polyester, or even
  blended fabrics. 
• 3-D Printer
• As is obvious, it is impossible to print a 3-D
  design on a t-shirt without the right kind of 3-D
  printer.  The device helps in turning the designs
  created on paper or even digitally into actual
  prints on the fabric. 

5

• Small Clips
• These are generally required to hold the garment
  in place to avoid any disruption in the printing
  process due to any sudden movement and wrinkling
  of the fabric.  
• 3-D Model
• There are several different types of 3-D modeling
  programs available online that are free to
  download. People can also search for 3-D custom
  t-shirts near me, to learn about the most common
  programs being used by such service providers.

6

• Slicing Software
• Slicing software is extremely important as it
  helps in fine-tuning the design to ensure that it
  gives the most impressive look after getting
  printed on the fabric. Printing without slicing
  software often results in the creation of
  t-shirts with distorted designs or ones that are
  not as appealing as they appear on paper.  
• Understanding The 3-D T-Shirt Printing Process
• Whether the 3-D technique is to be used for group
  t-shirt design or for creating a single tee,
  being aware of the process is essential to get
  the desired results. The most important steps
  involved in the process are discussed in brief as
  follows.

7

• Select The Appropriate 3-D Design
• To start with, the printers need to select an
  appropriate 3-D design that is to be printed on
  the custom t-shirt. The printers should factor in
  the size of the design and the capacity of their
  3-D printer to ensure that they get the desired
  results.
• Slicing The Selected Design
• Using appropriate software for slicing the
  selected design is another important aspect of
  the printing process. This is essential to
  convert the design into gCode, the programming
  language that informs the 3-D printer about the
  exact manner in which the design is to be
  printed.

8

• Proper Setting Of The T-Shirt
• To get the design printed on the t-shirt in the
  desired manner, it is important to set it
  properly on the printing plate. The fabric should
  be properly flattened and should not be stretched
  too much. In the case of smooth and slippery
  fabrics, mimi clips should be used to hold them
  in place.
• Printing The Design
• Before starting the actual printing of the
  design, it is important to check the settings of
  the printer. Moreover, the printing should be
  carefully monitored for the first couple of
  layers to ensure that the fabric is not being
  stretched too much. Once the printing is
  complete, remove the tee and apply fabric glue to
  reinforce the design and ensure its longevity.

9
Original Source https//blog.almamaterstore.in/cu
stom-printing-3-d-t-shirts-understanding-the-most-
important-aspects/