Kawasaki KX 65 Graphics

1
Kawasaki KX 65 Graphics
2
MX Graphic Kit Kawasaki KX 65 Design your own
Kawasaki KX 65 Graphics kit with our design
configurator. The KX65 is one of the most popular
65cc two-stroke dirt bikes for beginners who want
to race motocross. Since the 1998, the KX65 has
remained unchanged. In our configurator you can
select and design all Kawasaki KX65 dirt bikes
from the different year models from 1998 to
2019! Applying The Graphics The easiest
way to do it is to attach your plastics on your
bike, then you have to Do not hold plastic parts
and can concentrate entirely on the positioning
of your graphic! When fitting, we recommend
orienting yourself to the screw holes and closing
them properly position, then the rest should fit
by itself! If the part to be glued has no
screw holes, then you can, as shown in our
graphic above Cut the carrier film and gradually
remove it after positioning! After
positioning, it is important that the stickers
are firmly pressed on. The harder you press them,
the better they hold! To make it even easier
for you, there is a backyard design squeegee with
every complete decor! Compensate for the last
bumps on the adhesive edges with the addition of
heat and with a squeegee and press down firmly.
Finally, use the hot-air dryer to warm up all the
graphics again, especially on the curves, and
press firmly so that the adhesive can develop its
best effect. Leave the fully applied bike in
place for 24 hours and ideally at room
temperature and touch it up the next day if
necessary, warm it up with a hair dryer and press
it on for the last time!
3
BACKYARD DESIGN USA
L
230 N 4th St. Gadsen, AL 35901 United
States info_at_backvarddesianusa.com Mo. - Fr.
830am - 4pm https//backyarddesignusa.com/produkt
/kawasaki-kx-65/
https//www.facebook. com/bckvrddsan
https//twitter.com/backvardesian
https//www.instaaram.com/backvarddesian
https//www.voutube.com/channel/UCdEWid8rOT6-7GbNS
RItr8a