Title: Laser Cutting Parts: Nozzle Types and Uses
1 sales_at_altparts.com
Laser Cutting Parts Nozzle Types and Uses
Cincinnati Lasers are fiber laser systems that
give high speed cutting on thin materials at low
operating costs. This reduces the time and cost
for the operators as it makes the cutting
process fast and accurate. As it is a machine,
there are chances that it will need some
repairing after some time. Some companies
provide spare parts for such laser machines. One
can easily find the Mazak spare parts for these
laser machines when required. Cincinnati laser
has a touch screen display, easy to use buttons,
and a full-sized keyboard. This has prima optics
that are very much important to focus on the
cuttings by lasers. It can easily operate on
Windows Operating System, which makes it simple
to use for the operator. This has a camera
attached that makes it easy to see the process
of cutting.
www.altparts.com
2 sales_at_altparts.com
- Laser technology has made many changes in the
industries. Using this technology helps to
easily cut and engrave materials for the best
result and quality. Nozzles are for cutting or
engraving the materials based on the programs set
up for the process. - Advantages of Laser Technology
- Highly Accurate
- Excellence in Cut Quality
- Speed in High Processing
- Very small heat-affected zone compared to others
- Low application of heat
- Cutting and marking with the same tools
- Cuts many materials
- No contact between material and tool
- High-pressure laser cutting
www.altparts.com
3 sales_at_altparts.com
- Principles of Laser Cutting
- Rear Mirror
- Output Mirror
- Polarizing Mirror
- Telescope Mirror
- Beam Bender
- Cutting Carriage
- Adaptive Mirror
- Focusing Mirror
- Cutting Head
- Cutting Nozzle
- The standard nozzle for the Cincinnati lasers
helps in engraving and cutting. There are
different sizes of the nozzles according to the
requirements of the cuttings and designs. - The nozzle's correct size is very important for a
perfect cutting, e.g., nozzles with large holes
are for high-pressure cutting. If the size of
the nozzle is a bit large, the cutting gas
consumption increases and without affecting the
cutting process. If the size of the nozzle is
too small, the material cannot part easily.
www.altparts.com
4 sales_at_altparts.com
- Importance of Nozzle Distance
- The nozzle distance is very important for the
cutting processes and is programmed for height
control. The nozzle does not touch the material
for cleaner cutting. - The distance between the material and the nozzle
affects the quality of the cutting. The smaller
distance between the nozzle and material gives a
perfect cutting quality. There are some
restrictions for better cutting - For safe cutting, the minimum distance is a must.
- Minimum distance is approximately 0.025 inches.
- The nozzle distance is small or large for hole
piercing, which depends on the thickness of the
material. - Sizes of Nozzles
- Short Nozzle with large hole diameter (7mm)
- Laser cutting and engraving are done using this
size of nozzle and are mainly used for laser
acrylic processing. It gives a beautiful
flame-polished edge.
www.altparts.com
5 sales_at_altparts.com
- Short Nozzle with small hole diameter (3mm)
- The use of this nozzle is mainly for the cutting
of those materials that emit excess smoke, like
wood. This has a small opening that blows away
smoke and cutting gases. - It is not suitable for engraving dust intensive
materials like rubber or stamp plastic.
Engraving dust settles at the nozzle's opening,
which blocks it, causing burn holes in the lens. - Long Nozzle with small hole diameter (3mm)
- This is suitable for the combination with a
2.5-inch lens, useful for the large focal length
between the nozzle and the material. - Copper Nozzles for laser cutting with compressed
air - These copper nozzles are short with a hole
diameter of 1.7 mm. As this has an extremely
small diameter, the airflow directly targets the
kerf, which makes for a clear cut. - These are suitable for cutting thick materials
like wood with 5mm or polycarbonates. This
attachment comes in 4 different lengths,
depending on the lens's length and focal distance.
www.altparts.com
6 sales_at_altparts.com
End Words The spare parts are important for
handling such laser machines. Mazak spare parts
are very important for Cincinnati lasers, as
they provide accurate parts that help maintain
the machine. Using standard nozzles helps to cut
the materials and engrave them with the right
technique. Nozzles do not touch the material
while cutting for the best quality. The sizes of
nozzles affect the cutting quality.
This Article Post is Originally Posted here
https//www.sooperarticles.com/business-articles/m
anufactu ring-articles/laser-cutting-parts-nozzle-
types-uses-1799644.ht ml
www.altparts.com