Difference Between Radial and Bias Tyres -– Tyres Online UAE

1
(No Transcript)
2
ABOUT US

• Tyresonline.ae is a team of passionate tyre and
  wheel experts working together to fulfil your
  demands. The team is focussed on delivering a
  high level of customer care service through a
  friendly and personalised approach. You can trust
  the Tyresonline.ae team to make any
  recommendations necessary, remember they are
  experts, so take advantage of this.
• Tyresonline.ae is online tyre shop in Dubai and
  Abu Dhabi. Buy Car Tyres Online at an affordable
  prices and Get tyres installed at your doorstep
  or installer shop.

3
DIFFERENCE BETWEEN RADIAL AND BIAS TYRES

• How To Check If I Have Bias Ply Or Radial Tyres?
• Your trailer or RV probably has either of these
  models. The best way to check whether it is
  outfitted with bias ply or radial tyres is by
  looking on the sidewall. Just below the tyre
  size, you will be able to find the word radial
  or bias. If it says radial you should know
  that you have the more expensive and more robust
  tyre specification. 
• Lets take a look at both of the constructions in
  detail.

4
DIFFERENCE BETWEEN RADIAL AND BIAS TYRES

• Bias Ply Tyre Construction
• Bias ply tyres are made with reinforcing cord
  which is laid out diagonlly (typically 30 or 40
  degrees) from the direction of travel from each
  bead to bead.
• Each additional ply has reinforcing cords that
  are laid at an opposing angle to the ply beneath
  it.
• Most bias ply tyres are 4, which means they have
  4 layers of reinforcing fabric cords
• 6 ply, 8 ply and 10 ply options are available for
  heavier vehicles only.
• The sidewall and the tread are both supported by
  the same reinforcing piles, giving the tyre some
  unique characteristics.

5
DIFFERENCE BETWEEN RADIAL AND BIAS TYRES

• Radial Tyre Construction
• In radial tyres, the reinforcing cords are laid
  at a 90 degree angle from the direction of travel
  from bead to bead.
• Each additional ply is laid in the same direction
  as the one located underneath it, making all the
  reinforcing cords to run in parallel to each
  other.
• The reinforcing belts are added between the
  radial plies and the tread (here, belts are made
  from woven strands of steel, nylon, Kevlar and
  other materials).
• More rubber is applied over the belts to create
  the tread.
• The sidewall and tread are two independent parts
  of the tyre.

6
Head Office 2nd Floor Office 223 Block C,
Mardoof Bldg. Al Safa 1, Sheikh Zayed Rd. Dubai,
UAE
Contact Number/ Whats Up 971 800 25589737 Email
customercare_at_tyresonline.ae