Title: Signs of a Failing Accelerator Cable in your Car
1SIGNS OF A FAILING ACCELERATOR CABLE IN YOUR CAR
2Physical accelerator cables are still found in
most cars.
3It serves as a mechanical link between the gas
pedal throttle plate.
4The most common reason behind the failing
accelerator cable is they break.
5Here are the signs of a failing accelerator cable
in your car.
6DAMAGED OUTER COVERING
7The accelerator cable is covered by an outer
rubber sheath.
8Sometimes the cable can come in contact with
sharp edges.
9When they come in contact with sharp edges, it
damages the cable.
10As the cable is under constant stress any damage
can break it completely.
11ISSUES WITH CRUISE CONTROL
12Most cable operated throttles also use a cable
for cruise control.
13If there are issues with the cruise control, it
can be related to accelerator cable.
14If you notice jerking binding from pedal, then
it is a sign of issues with the cable.
15As both cables are connected, issues with one can
affect the other cable.
16DELAYED ACCELERATOR RESPONSE TIME
17When the gas pedal is depressed, the engine
should respond immediately.
18A delayed response points to a significant amount
of problems.
19Sometimes the accelerator cable can get stretched
over time delay the response.
20Delayed response also means that you should have
the cable slack adjusted.
21CONCLUSION
22The accelerator cable needs to be inspected
regularly to rule out issues.
23Take your car to a repair shop to replace the
damaged accelerator cable.
24THANK YOU
http//techplusautomotive.com/