6 Must-Know Factors You Should Know About Nano fiber Filters

1

• By - DHA Filters

2
How to Select a Filter Cartridge and Microns for
Water Treatment
This Document is prepared by DHA Filters

• Choosing the right filter that works effectively
  against contaminants present in your water may
  seem easier, but it is a lot more about a
  sensible decision. Any wrong decision can cost
  you in the long run. This article carries
  everything you need to know about Filter
  Cartridge and Microns for water filtration
• Filters extract contaminants from the water. A
  variety of materials are used in the
  manufacturing of filters. The most popular are
  wound yarn, polypropylene, polyester, cellulose,
  plastic, fiberglass and cotton.
• They come in many sizes which makes it very
  difficult to pick the best industrial
  filter based on your preferences. Among the vast
  options, there are two special kinds Surface
  Filter Cartridges and Depth Filter Cartridges.
  Lets discuss each separately.

3
Surface Filter Cartridges
This Document is prepared by DHA Filters
4
Surface Filter Cartridges Detail
This Document is prepared by DHA Filters

• Surface filtration is carried down on the liquid
  membrane surface. Polypropylene, Teflon or nylon
  sheets are plisse and tied to ends for high
  filtration..
• When pressure drops, the filter cartridge can
  sometimes be withdrawn and cleaned off from the
  filter casing.
• Filters which are commonly used as coarse
  pre-filters, typically between 30 and 500
  microns, may also be used on sub-micron
  applications.
• The Filtration levels can range between 50
  microns and 0.04 microns. A surface filter
  (pleated) has a much higher filtration rate than
  a profound filter when it comes to compensating
  the inadequacy of space.
• These filter papers and machines have the
  advantage of being inexpensive, easy to install,
  power-free and wastewater-free.

5
Depth Filter Cartridges
This Document is prepared by DHA Filters
6
Depth Filter Cartridges Detail
This Document is prepared by DHA Filters

• As the name suggests, depth filter cartridges
  extract contaminates deeply from your water. They
  can collect larger particles on the surface and
  smaller particles below the surface up to the
  middle of their core. The woven lines, twisted or
  melt-blown ones. They work best when it comes to
  filtering a range of particle sizes.
• Depth filters absorb more sediment and generally
  hold more sediment compared to the surface filter
  cartridge. They filter water without any loss of
  pressure. These filters are highly effective
  against water contamination and can extract a
  high quantity of particles without compromising
  the efficiency of separation. Whats more, they
  are also highly effective oil mist collectors.
  One example of a depth filter can be a micron
  filter.

7
Microns for Filters
This Document is prepared by DHA Filters

• Water filter treats minerals, metals, chemicals,
  and bacteria present within your water. These
  machines catch the toxins instead of killing or
  sterilize them. But, it is important to consider
  microns for filters, before paying money for
  them.
• Based upon the depth of the pore, molecules are
  trapped into the filter and cannot get through
  the pores. A micron is an indicator of how
  effective the filter is for smaller particles.
• Why should you consider microns for a filter? The
  question is quite obvious to raise. It is because
  the number of microns is an indicator of the
  performance in the purity of a container. It
  simply means the bigger the micron, the more
  you take pure H20 out of the atmosphere. Items
  such as activated charcoal and reverse osmosis
  filters can also be associated with micron filter
  sizes.

8
Microns for Filters
This Document is prepared by DHA Filters

• A tank of one or less micron-scale and portable
  water filters for other water collection systems
  are commonly used in buildings. One micron filter
  eliminates parasites and many bacteria from the
  water and you can reuse the liquid bags of filter
  after washing.
• The scale of bacteria usually goes from 0.4 to 2
  microns. In order to ensure that all the
  potential bacteria are eliminated, 0.4 microns or
  less in terms of filter size should be selected
  as the size of the container. Sometimes, this is
  more expensive, but for certain water supplies,
  it can be worth it.
• More than often, one micron is sufficient. It is
  estimated that 99.9 of all bacteria will be
  eliminated from the water by this filter scale.
  If chlorine has already been used in your water
  supply, many of these bacteria will nevertheless
  no longer appear in the water and filtration for
  heavy metals or other contaminants is more
  efficient.

9
So, Which Type Of Filter Cartridge Should You
Choose?
This Document is prepared by DHA Filters

• It is important to check the best filter with
  different cartridges or microns.
• In general, for pre-filters ranging from 30 to 50
  micron, plated surface filters are purposed. For
  fine sediment, with a spectrum of 1-5 micron
  filters, dual-grade depth filters may be used.
  Such filters start at 50 outside and pass through
  a wide range of sediment particles to microns
  within. Dual-grade filter cartridges are
  separated from the normal spun or wound filters
  by 2.3 times the volume of sediment.
• So, choosing a filter cartridge is a subjective
  decision. You need to consider your needs and
  preferences before purchasing the one.

10
Thanks For Reading the Document
This Document is prepared by DHA Filters