How to Select the Right Globe Valve Suppliers For a Specific Application

1
Ali Salman Trading Company LLC
https//astc-me.com/
2
How to Select Globe Valve Suppliers For a
Specific Application

• A Globe valve is nothing but the motion valve.
  This is primarily designed to stop, start and
  regulate flow. The disk is used in the Globe
  valve and it is helpful to remove them from the
  flow path or it can completely close the flow
  path.
• This is the most useful valves in isolation
  and throttling services. Globe Valves
  Suppliers are used where the pressure drop
  through the valve and it is not controllable.

3

• You have to make sure that the maximum
  differential pressure across the valve disc
  should not exceed 20 percent of the maximum
  upstream pressure or 200 psi (1380 kPa),
  whichever is less. Some valves are specifically
  designed for applications exceeding these
  differential pressure limits.

4
(No Transcript)
5
Types of Globe Valves

• Tee Pattern Globe Valve
• Angle Pattern Globe Valves
• Pattern Globe Valves Design

6
1. Tee Pattern Globe Valve

• This is the simplest body type, with a
  Z-shaped diaphragm. With the help of the
  horizontal seat, the stem and disk can travel
  perpendicular to the horizontal line. This is the
  best design and it offers the lowest coefficient
  of flow and higher pressure drop.
• globe valve is generally used in severe
  throttling services, such as in bypass lines
  around a control valve. This type of valve is
  also the best choice in the conditions where
  pressure drop is not a concern and throttling is
  required.

7
2. Angle Pattern Globe Valves

• This is a modified version of the basic Tee
  Pattern Globe valve. The ends of this Globe valve
  are at an angle of 90 degrees, and fluid flow
  occurs with a single 90-degree turn. This type of
  valve has a slightly lower coefficient of flow
  compared to wye-pattern Globe valves.

8
3. Pattern Globe Valves Design

• This is the alternative type for the
  high-pressure drop, inherent in Globe valves. In
  this type, the angle of seat and stem is 45
  degrees. And this thing offers a straighter flow
  path at full opening and offers the least
  resistance to flow. These valves can be cracked
  open for a long period without severe erosion.

9
Contact us

• baniyas Square-14th Road
• Dubai, UAE.
• Contact No 04-2287694
• Email info_at_astc-me.com
• Contact Here https//astc-me.com/contact/

10
(No Transcript)