Simple Procedures to Remove the Rust from the Car - PowerPoint PPT Presentation

About This Presentation
Title:

Simple Procedures to Remove the Rust from the Car

Description:

Rust can cause severe damage to the body of your car. So, when you find signs of rust, get it removed as soon as possible. There are many options other than simply sanding the rust. You should follow the right procedure to keep your car free of rust. To know the simple procedures to remove rust from your car, see this show. – PowerPoint PPT presentation

Number of Views:19
Slides: 28
Provided by: loudenmotorcar
Category: Other

less

Transcript and Presenter's Notes

Title: Simple Procedures to Remove the Rust from the Car


1
Simple Procedures to Remove the Rust from the Car
2
The rusts are the corrosive and unsightly
problems in the car due to the electro-mechanical
reaction between the iron and oxygen and can lead
to rust.
3
If you leave the rust untreated, it can ruin the
metal surface of your car. So, you need to
eliminate the oxidized metal as much as you can.
4
So, its always advisable to treat the metal
surface of your car to inhibit the further growth
of the rust.
5
Sanding isn't only an effective way to remove the
dust, so use alternative methods for remove the
rust effectively.
6
Look at the below-defined steps to remove the
rust from your car easily and effectively.
7
Wash the rust place
8
Before removing the rust from your car, first,
you have to wash the area for identifying the
affected rusted area carefully.
9
Make sure that after washing it, there is no
additional dirt, grease or grit attached with the
rust to prevent the further damage to your car.
10
Mask off the rust place
11
By putting the mask at the few feet away from the
rust repair area help you to prevent the debris
getting into the existing paint.
12
You can also use a tap sealed mask under the car
to indicate the rusted area and protect its
floor.
13
Rub the rust place
14
You can rub the rusted area with sandpaper for
remove the paint and make sure that you only push
it with your index finger.
15
You can use sand sponge and block at the rusted
spots down to bare metal as well as corners to
remove the rust.
16
Coat the rust place
17
If you leave the rust material, then it will rust
again. So, coat it with a primer because the
primer provides a strong bond to the bare metal.
18
Ensure that you will apply three coats of primer
and wait for a few minutes to dry it. Don't apply
the primer over it, otherwise, the coat will run.

19
Spray on the rust place
20
After applying the primer from left-to-right rows
of the rust, then spray a color coat over the
primer.
21
Apply several coats of the color coat by allowing
the recommendation of 10-15 minutes between the
coat.
22
Polish the rusted place
23
To match the rusted area with the other part of
your car, apply the color coat of paint similar
to your car and allow it to dry for 24 to 48
hours.
24
Never wax the car for 30 days after painting
because the process can follow for waxing your
car by pulling the fresh paint from that damaged
area.
25
Don't leave the rusted part of your car because
in some instance it may lead to any serious
damages.
26
If you found any serious damages in your car due
to rust, then don't handle it by own, take it
immediately to your mechanic.
27
Visit Us
https//www.loudenmotorcars.com/
Write a Comment
User Comments (0)
About PowerShow.com