Know about Re-Keying Door Locks like the Cam Locks and Padlocks - PowerPoint PPT Presentation

About This Presentation
Title:

Know about Re-Keying Door Locks like the Cam Locks and Padlocks

Description:

So, do you know exactly what Re-Keying is and how essential is it for you? The process where the keys and lock code is changed is Re-Keying. First, to match the new code, the combination pins in the lock are changed after the new code is generated. – PowerPoint PPT presentation

Number of Views:23
Slides: 7
Provided by: officekeys
Category:

less

Transcript and Presenter's Notes

Title: Know about Re-Keying Door Locks like the Cam Locks and Padlocks


1
Know about Re-Keying Door Locks like the Cam
Locks and Padlocks
https//officekeys.ca/
2
So, do you know exactly what Re-Keying is and how
essential is it for you? The process where the
keys and lock code is changed is Re-Keying.
First, to match the new code, the combination
pins in the lock are changed after the new code
is generated. Second, to enable the operation
of the lock and match the new code, new keys are
cut. Third, to the end-user, the new code is
registered of the Abus Padlocks.
3
All locks are not re-keyable. To be
cost-effective, some are just too inexpensive
while others are not meant for the re-key
process. About 30 of the price of a new
high-security lock will be the cost of re-keying
and most High-Security locks are capable of the
process. How this process works will be
determined by the type of lock. You would send
those to a Lock Service Center if you have
padlocks or cam locks. Their new keys would be
cut and the locks would be re-keyed to your
specifications.
4
You could do an exchange program after ordering a
few new locks if you can't send the multiple
locks in. Here, to the new locks that you started
the process with, the locks you send in would be
re-keyed. Again on the type of lock cylinder, it
depends when the re-keying door locks. To undergo
the same process as outlined above for cam locks
and padlocks from Lucky Line Products it can be
sent into a Lock Service Center after being
removed from the door lock if it is an SFIC
(small format interchangeable core) cylinder.
5
You must call out a locksmith if the cylinder is
permanent. Being at your home or facility, he
will be able to cut the new keys and re-key the
lock from Capitol Industries. Over the cost of
new replacement locks, Re-Keying is a way to save
money as mentioned earlier. To gain back key
control, it is also a perfect way. Key control is
knowing about where they are at all times and how
many cut keys you have.
6
Office Keys 2727 Courtice Road, Courtice,
Ontario, Canada Phone- 416-936-5804 Email-
info_at_officekeys.ca Website- https//officekeys.c
a/product-category/capitol-industries
Write a Comment
User Comments (0)
About PowerShow.com