Electrical Cord Testing Melbourne - PowerPoint PPT Presentation

About This Presentation
Title:

Electrical Cord Testing Melbourne

Description:

In testing electrical cords, we inspect and check for any bent or damaged pins, damaged or missing securing nut, the form of the cord and if it has been twisted, damage on sockets or plugs, discoloration, and if there are any foreign objects that may have attached to the outer insulation of the cord. Read More: – PowerPoint PPT presentation

Number of Views:56
Slides: 9
Provided by: powerqtesttag
Category: Other

less

Transcript and Presenter's Notes

Title: Electrical Cord Testing Melbourne


1
Welcome to Powerq Test Tag
2
Electrical Cord Testing Melbourne
In testing electrical cords, we inspect and check
for any bent or damaged pins, damaged or missing
securing nut, the form of the cord and if it has
been twisted, damage on sockets or plugs,
discoloration, and if there are any foreign
objects that may have attached to the outer
insulation of the cord.
3
RCD/ Safety Switches Melbourne
The Residual Current Device (RCD) is an
electrical safety device that protects from
electric shock and prevents injuries/ fatalities.
RCD is like a very sensitive safety switch that
disconnects a circuit / cuts the power as soon as
it detects an imbalance in electric current which
could be otherwise fatal to a user. Equipment or
appliances are connected to RCD to ensure
protection from shock as it cuts off the power.
4
Emergency Exit Light Testing Melbourne
A business should always be confident that the
emergency exit light and exit signs are working
as expected. Nobody would like a situation at
work where emergency lighting or exit signs do
not turn on in the event of a power failure or
evacuation. Attention is required as people at
any workplace should be able to find their way
out of the premises in case of an emergency.
5
Visual and Defect Report Melbourne
It has been proven that more than 90 of the
defects which have caused issues are generally
evident through a visual inspection. To ensure
your own and workers safety, electrical
equipment and machines should be visually
inspected, checked and tested on a timely basis.
The frequency for such testing usually depends on
the environment in which the machine is operated
and the type of equipment.
6
Three Phase Testing Melbourne
Three phase testing processes effectively follow
the same procedures and steps involved during
visual inspection. This includes testing,
tagging, reporting and logging the results post
inspection. A three phase switch or socket is
generally found in an industrial environment
where high voltage is required in order to run
heavy machinery.
7
Contact Us
Address 58 Parkvista Dr, Truganina VIC 3029,
Australia
Phone 61 433723389
Email info_at_powerq.com.au
Website powerq.com.au
8
Thank You
Write a Comment
User Comments (0)
About PowerShow.com