After cold room installation what thing you need to follow

1
After Cold Room Installation What Things you Need
to follow Sometimes, after you have purchased
cool rooms in Melbourne, you will call a guy from
the company to come and install the piece of
product for you. The use of these cold rooms can
be widely seen in the restaurant business and
food industry. In case, you are making plans to
call experts for cold room installation in
Melbourne, they will do it for you. But, after
you are done with the installation of the
commercial cool rooms in Melbourne, you can start
using it. Storing food items for a long time is
the main reason for you to use these cool rooms.
But, after you are through with installation,
you need to be aware of the maintenance features.
Until and unless you get to maintain the cold
rooms for good, the items wont last for long,
and might cause you some serious money, which you
dont want to lose.
2

• The daily dose of cold room maintenance
• There are some of the major cold room maintenance
  checks, which are to be performed on daily basis.
  You have to follow those if you want the products
  to last for a long time.
• You have to be sure that the compressors are not
  quite leaking any oil. Make sure to check if the
  PLC switchboard is operational optimally and
  ensure that cold room is cooling right at correct
  temperature.
• You have to check that there is no ice formation
  taking place on evaporator and take some time off
  to check the head pressure of the secondary
  system too. If you want, you can check out all
  the surfaces for the unwanted substances and
  their accumulations like mould, leaked product
  and more.

3

• Monthly preventative maintenance practices
• Just because you have installed cold rooms
  properly, that is not the end of story. As the
  next stage, you have to get the machines checked
  monthly. For that, calling the cold room service
  providers is the clever idea to address now.
• It is always your duty to clean the condenser
  coil fins, unit cooler fins and evaporators. You
  have to keep a close watch over reverse blowing
  to see if it is working fine. Moreover, you have
  to ensure that the proper cooling is full load.
• You have to maintain the working ability of
  refrigerant levels and see if those are working
  fine or not. You further need to check the
  proficient working capability of control valves
  and defrosting functions.

4
Check the doors of cold rooms There are
multiple forms of door types available for cold
rooms. It can be sliding, roller and even exit
doors in cold storage rooms. The doors are
inspected every two months, and it should be a
part of your maintenance service, after you are
done with the installation. Maintaining door is
important if you want to keep the interior
temperature of the room constant. Just be sure
to clear out these points first and everything
will work out well for you. Remember to create a
checklist of what needs to be done after
installing your cold rooms.
Original Source
https//kbuildinggroup.weebly.com/blog/after-cold-
room-installation-what-things-you-need-to-follow