How to Protect and Maintain Wooden Doors (1) - PowerPoint PPT Presentation

About This Presentation
Title:

How to Protect and Maintain Wooden Doors (1)

Description:

How to Protect and Maintain Wooden Doors – PowerPoint PPT presentation

Number of Views:17

less

Transcript and Presenter's Notes

Title: How to Protect and Maintain Wooden Doors (1)


1
How to Protect and Maintain Wooden Doors
2
Common Problems
The things that do the most harm to your property
are dampness, extreme daylight, and wind/soil
harm. These will all debase the complete on the
entryway, and on the off chance that you don't
fix the complete, the fundamental wood could
likewise get harem
Outside wood entryways that are not secured by a
yard or even a little shade will experience the
ill effects of climate harm more rapidly than
entryways that are incompletely secured. This
implies you ought to assess them all the more
routinely. You are searching for the
accompanying
3
  • Splits in the wrap up
  • Stripping paint
  • Air pockets
  • Raised wood grain
  • Dim streaks showing up in the wrap up

4
  • In the event that you distinguish any of those
    issues, you should take measures to fix the
    complete as fast as could be expected under the
    circumstances. The sooner you treat the issue,
    the more extended your entryway will last.

5
Setting up the Door
  • Before you can do any fix work, the principal
    thing that you ought to do is spotless the
    entryway. Expel any unmistakable soil and dust,
    and play out a point by point assessment. On the
    off chance that there are only a bunch of issues
    on the entryway, there is no compelling reason to
    stress over repainting the entire entryway.
    Little chips and wear spots can be dealt with
    while the entryway is set up, and there might be
    no compelling reason to repaint the entire
    entryway.

6
  • Be that as it may, in the event that the complete
    is seriously harmed, you may need to play out a
    full complete reclamation. This is something that
    you should expel the entryway from the edge
    before you endeavor. To do this, precisely tap
    out the pivot pins, and after that move the
    entryway. Place it on a level, level surface and
    evacuate the majority of the equipment (counting
    locksets, entryway handle or handle and pivots).
  • Place these in a sheltered place while you deal
    with the entryway. Note that evacuating a strong
    wooden entryway is extremely a two man work.
    These entryways can be far heavier than you may
    expect, so put wellbeing first when you endeavor
    to move them.

7
A Bespoke luxury door ManufacturerVisit
www.solidwoodendoors.com
8
  • Make sure to strip every one of the six sides of
    the way to guarantee that there's a decent even
    wrap up. After you have evacuated the current
    complete, sand the entryway utilizing 120 or 150
    coarseness sandpaper, taking consideration to
    sand contrary to what would be expected.

Always go for a bespoke luxury door manufacturer
9
Thank you !Any questions?? Please visit
www.solidwoodendoors.com
Write a Comment
User Comments (0)
About PowerShow.com