How to Change the Oil in a Car?

1
How to Change the
Oil in a Car?
2
Introduction

• The oil inside the car engine helps to protect
  and lubricate the various components inside it.
• You need this oil in the best condition so that
  it can carry out its required job effectively.
• With time, your car engine oil might get
  polluted with the accumulation of impurities
  that can affect its performance.
• Better quality of engine oil means longer
  lifespan of your motor.

3

• Supplies you need

• Engine Oil
• Oil tray
• Oil filter
• Funnel
• Sump washer
• Socket wrench
• Oil filter removal tool
• Torque wrench
• Gloves
• Wood Blocks
•  

4
Steps to change the oil in a car

• Set up the spot where you are going to carry
  out the whole task. Put all your tools,
  containers, rags and supplies in one and get
  going.
• Now place your bike on the side-stand, rear
  -stand or centre- stand if you have one.
• Place your drain stand directly under the bolt.

5

• Remove the bolt using a socket wrench and
  dont burn yourself if the oil is still hot.
• Let the impure oil to finish draining while
  you take off the oil filter.
• With the help of filter wrench remove the oil
  filter.
• Remove the old crush washer and install a
  fresh one.

6

• Secure the drain bolt back in but make sure it
  is clean.
• Prep your oil filter by filling it up with
  about a quarter full of fresh oil.
• Now clean the area around the filter off any
  dirt or grime and dab a small amount of fresh
  oil around the areas just to get a good clean
  contact.
• Lastly, clean up all the oil stains, put all
  the screws and caps in place and you are good to
  go.

7
Contact us
In case you are in need of any sort of spare
parts be it body, clutch, break, electrical,
engine, propeller shaft or suspension, visit BP
Auto Spares India. Website www.bpautosparesindi
a.com/tata-spare-parts Support Email
info_at_bpimpex.in Contact No. 91-11-23824308