Get The Best Surgery Results With Locking Screw India System

1
Get The Best Surgery Results With Locking Screw
India System Locking screws are one of the vital
implants that orthopedic surgeries require to fix
a bone related injury and joint pain. It is
because of locking screws that a patient can move
frequently. These screws keep artificial bones
and other implants tightly in place. HEMC Ortho
meets global standards of quality in making such
implants and instruments. They manufacture entire
gamut of orthopedic implants such as locking
screws of all types and sizes to the satisfaction
of the surgeons and patients.
Locking screw India manufacturers not only meet
the domestic demand but export orthopedic
implants and instruments to many countries also.
Locking screws are required by the surgeons
because of their vital importance for a surgery
procedure. Indian manufacturers are known for
their high quality standards. They keep the
quality intact at high level at every phase of
manufacturing right from raw material to the
finished products. Why locking screws are so
important? Once, orthopedic surgeons depended on
conventional screw system. They have to put in
additional efforts to keep the implant system
tight and secure. But often the system did not
work to the satisfaction and in many cases a
repeat surgery was required to deal with the
resultant inflammation. The conventional screw
system required the surgeon to make precise
adaption of the locking plate so that the plate
can be fixed to the bone underneath. In addition
to this problem, conventional screw method used
to pull up the plate toward the screws was
tightened. As a result of it, the position of the
implants altered, creating more problems for the
patients. Locking screw system has eliminated the
requirement of precise fixing of the screw to the
locking plate. The locking screw/locking plate
system is much easier to use. Because of these
screws, the locking plate does not come in the
contact of the underlying bones. When the surgeon
tightens the screws, the screws are locked
automatically to the plate. The whole system gets
tightly locked. So, the surgeon does not have to
make additional efforts to compress the bone to
the locking plate. As a result of it, the
chances of the segment position altering are nil.
This is because of the insertion of the locking
screw system.
2
The surgeons prefer locking screws also because
this system leaves the underneath cortical bone
untouched. In the conventional screw system, the
surgeons had to compress the underlying surface
of the plate. As a consequence, the plate was
pressed down to the cortical bone. This caused
more surgical complications. Another reason for
the surgeons using locking screw system is that
the screws dig firmly in the plates. These
screws are big and strong. This is a crucial
advantage as the screws will not loosen from the
plate. The locking screw system will remain firm
even when the screws are inserted into a
fractured gap of the bone. When the surgeon
inserts the locking screw through the bone graft,
the screw remains firmly placed. As a result,
the healing process goes smoothly for the
patient. The incidences of inflammation were much
higher in the conventional screw system. This was
because the screws loosened very often and it
caused an inflammatory response and the resultant
infection. The locking screw system has well
taken care of that problem. Since the screws are
automatically locked and tightly put in place,
there is almost no chance of the screws and the
hardware system as a whole loosening.