Few Things that Help You How to Cut Logs With Chainsaw

1
(No Transcript)
2
Things to Consider Before Cutting Logs With a
Chainsaw
3
(No Transcript)
4

• When you decide to cut logs, you probably
  directly decide to get a chainsaw without doing
  much homework. But, if you are a new homeowner
  who is new to using a chainsaw, you should learn
  a few tactics.
• Many people directly opt for a gas chainsaw with
  a diameter of 16 inches when they decide to cut
  logs.

5
(No Transcript)
6

• However, in case you are just hoping to do the
  odd log cutting thing at your home, you can
  invest in an electrical chainsaw. But ensure that
  the diameter is not greater than 16 inches.
• There are plenty of websites like The Pro Cutter
  who provides some of the best ranges of Chainsaws
  in the market. You can check them out here
  http//theprocutter.com/

7
(No Transcript)
8

• How to cut logs with chainsaw? Here are a few
  things that you need to consider before you
  decide
• 1. The Size of the Saw Always pay attention
  towards the size of the saw. What is the diameter
  of the log? The diameter of the log will also
  determine the size of your chain bar as well as
  the engine of the same.

9
(No Transcript)
10

• 2. Fuel Remember to keep enough fuel in your
  log so that you do not run out of it throughout
  your logging process. Make sure that you only use
  fresh fuel every time you start a new logging
  session or a trip. This will keep your chainsaw
  running without any hassles.
• 3. Importance of a Claw Bar You require a claw
  bar if you are cutting a big log. They prove to
  be useful in case you have to move to a big log.
  You may need to do that to cut the log from the
  underside. That causes you to cut big logs once
  you get too profound and your chain bar is
  shorter.

11
(No Transcript)
12

• 4. Use of Hammer or A Sledge Hammer You will
  require a very good hammer or a sledgehammer for
  larger logs to pound the wedge into the log.
  Driving the wedge into wood is the initial step
  of part logs.
• 5. Need of Splitting Maul Splitting maul looks
  similar to an axe, but it is heavier and it helps
  you to push the sharp edges into the log.
  Basically, it is a half axe tool and a half
  sledge hammer.

13

• 6. Safety Needs Before you go ahead and start
  working with a chainsaw, it is important that you
  take certain safety measures. Wear the relevant
  safety gears, and take other precautions
  whichever is important. 
• Here are a few things you should consider
• Protect your eyes from debris and sawdust by
  wearing safety goggles. Operating chainsaw
  without safety goggles can turn out to be
  damaging for your eyes.

14
(No Transcript)
15

• If you are operating a gas chainsaw, ensure you
  protect your ears. The prolonged noise can make
  your ears suffer.
• Ensure that you wear properly fitted protective
  clothing. Wear overalls, hats and gloves to
  protect yourself completely.
• The chainsaws operating manual has all kinds
  of safety measures. Follow them.

16
(No Transcript)