Plumbing Designing training in hyderabad - PowerPoint PPT Presentation

About This Presentation
Title:

Plumbing Designing training in hyderabad

Description:

Sanitary Sewer Systems - Water flowing from plumbing fixtures is collected in the sewer system of the building. The plumbing engineer designs the system until it connects to a municipal sewer system or an on-site disposal or containment system. – PowerPoint PPT presentation

Number of Views:14
Slides: 5
Provided by: futuregentech
Tags:

less

Transcript and Presenter's Notes

Title: Plumbing Designing training in hyderabad


1
Mail Us- futuregtechnologies_at_gmail.comCall Us-
91 8328253848
  • This course provide Design, Drafting and
    installation of plumbing and firefighting system,
    cold and hot water supply system, drainage
    system, storm water system, water supply and
    drainage pipe sizing design and calculations,
    pumps sizing and calculations, Designing and
    installation of water hammer arresters, sizing of
    hot and cold water storage tanks.
  • Plumbing, system of pipes and fixtures installed
    in a building for the distribution and use of
    potable (drinkable) water and the removal of
    waterborne wastes. It is usually distinguished
    from water and sewage systems that serve a group
    of buildings or a city.
  • Plumbing is any system that conveys fluids for a
    wide range of applications.
  • Plumbing uses Pipes, Valves, Plumbing fixtures,
    Tanks, and other apparatuses to convey fluids,
    Waste removal, and potable water delivery.
  • The term plumbing fixture embraces not only
    showers, Bathtubs, Lavatory basins, and toilets
    but also such devices as washing machines,
    Garbage-disposal units, Hot water heaters,
    Dishwashers, and drinking fountains.
  • The water-carrying pipes and other materials used
    in a plumbing system must be strong.
    Noncorrosive, and durable enough to equal or
    exceed the excepted life of the building in which
    they are installed.
  • Introduction on Plumbing System
  • Methods of Plumbing System
  • Water supply
  • Drainage system
  • Storm water System
  • Irrigation
  • Plumbing codes standards
  • Plumbing concept

2
Water Supply System Types of Water Supply
System(HOT COLD) Types of fixtures Types of
fittings Types of valves Fixture water
Requirement- GPM Hot Cold Water Pipe Size Water
Distribution-Pipe Routing Pipe Joining
Methods Water Supply commercial
industrial Water supply Fixtures Supply Piping
System Pipe materials Water Supply Controlling
Equipment Cold Water Pipes Rooting Hot Water Pipe
Rooting Designing of Drainage System Types of
Drainage (one two Pipe) System Grey (Foul
Waste) Water Types of Fixtures Low Level High
Level Drainage System Drainage Pipe
Sizing Introduction to Drainage
System Fundamental of Drainage System Traps Used
for drainage system Stacks in Drainage System
Waste, soil vent stack Building
Cleanout Drainage Pipe System Pipe Material for
drainage
3
  • Drainage System Pipe routine
  • Waste water drainage Piping routine
  • Vent Pipe designing
  • Draining System Pipe Joining methods
  • Selections of Drainage Pipe fitting
  • Main Hole sizing
  • Waste Water Collection Tanks
  • Soak Away Pits
  • Septic tanks
  • PLUMBING SPECIALITIES
  • Pool Water Supply
  • Waste Water Drainage
  • Recirculation System
  • Storm Drainage System
  • Rain Water Harvesting
  • Irrigations System
  • Water Features
  • Potable Water System
  • Modern Fixtures in Plumbing System

4
Invert Level of drainage Pipe Pipe Slop Scale
Setting Plotting Co-Ordination Drawing As-Built
Drawing Model Management Equipment
Schedules PLUMBING SYSTEM EQUIPMENTS Booster
pumps Submersible Pumps Boiler and Gresser Solar
Heaters Water Storage Tanks Grease
interceptor Wash Basin Water Closet Bidet Bath
Tub Shower Urinals Kitchen Sink Floor
Drain QUALITY SYSTEM Bill of Quantity Material
Submittals Equipment Schedules
Write a Comment
User Comments (0)
About PowerShow.com