Title: Types and Feature of Infusion Set For Infusion Pump - Angiplast.com
1Types and Feature of Infusion Set For Infusion
Pump
2Infusion Set For Infusion Pump
- The gadget is effective in pumping any fluid into
our body. The tubing of the gadget comes in
factor lengths to suit different requirements. - Infusion set Available in vented (for bottles and
bags) and non-vented (for plastic bottles)
3Available in Two Types
- 62" IV Administration Set Vented,
- Vented Spike 20 Drops-ml with Guard
- Drip Chamber 70mm
- Fluid Filter-15 micron
- Latex Free 'Y'-Site
- Flow Regulator
- Luer Lock Adaptor with Cap
- 3.0mm x 4.1mm PVC Tubing-Length 13515cm
- EO Sterile
- Paper Poly Pack
- Quantities per Carton 300 pcs.
4Available in Two Types
- 62" IV Administration Set Non-Vented,
- Non-Vented Spike 10 Drops-ml with Guard
- Drip Chamber 60mm
- Fluid Filter-15 micron
- Latex Free 'Y'Site
- Flow Regulator
- Luer Tip Adaptor with Cap
- 3.0mm x 4.1mm PVC Tubing-Length 13515cm
- EO Sterile
- Paper Poly Pack
- Quantities per Carton 300 pcs
5Infusion Set For User
Many pump user site their implantation sets on
the belly, in a generally half circle range
around and underneath the navel.
- Different locales incorporate the upper leg,
upper rear end, hips, upper arms and lower back.
Insulin retention may change from site to site,
so it is imperative that patients are educated
with respect to the best destinations to use by
their diabetes counsel.
6Infusion Set For User
There are a few sorts, styles, and sizes of
implantation sets accessible to permit an insulin
pump client a decision to tweak what works best
for them. These shift in IV Cannula length,
cannula section edge and in the length of tube
interfacing the cannula to the pump.
- For example, a person with little muscle to fat
quotients may utilize a set with a short cannula
that enters the skin at a shallow edge, while a
person with more muscle to fat quotients may find
that a more drawn out cannula entering at right
points to the skin works best. Most mixture sets
have a standard Luer Lock connector with the goal
that they will mate to most insulin pumps
7For More Information Contact Us
ANGIPLAST PRIVATE LIMITEDPlot No 4803, Phase
IVG.I.D.C., Vatva,Ahmedabad - 382
445INDIA. E-mail sales_at_angiplast.com 91
9662004148
8Presentation By
www.Angiplast.com