How To Build A LED Light

1
How To Build A LED Light

• When you create a simple LED light, you can
  become a great project for children and adults
  who just learn the electronics. 

2

• When you create a simple LED light, you can
  become a great project for children and adults
  who just learn the electronics. LED light can be
  built using a simple circuit with an LED,
  consisting of a resistor and a battery. After the
  LED lights were soldered together, which was held
  the opening for the battery and LED, it can be
  placed almost all of the plastic housing.
  Resistors, are used to regulate the flow of
  current through the LEDs. Also a large amount of
  current can cause permanent damage to the LED too.

3
Step 1 - To one end of the resistor 1K ohm and
connect the red line on the battery holder.
4
Step 2 - Solder the free end of the resistance to
the LED of the positive lead. The positive
terminal of the resistor is usually longer than
the negative terminal.
5
Step 3 - Pin the black line of the battery holder
to one wire push-button switch. Solder the lead
of another push button on the negative side of
the LED.
6
Step 4 - Connect the battery to the battery
holder. When you press the switch button, LED
will light up.
7
Step 5 - If there is a need to mount the LED
light to the selected container, remove the
battery.
8

• If you want to view information and buy lighting
  products in Myanmar, join with Changi-Light
  Myanmar company, which is one of the leading
  electrical products trading company in Myanmar.

9
Thanks For Watching

• www.baganmart.com
• www.facebook.com/BaganMart
• www.twitter.com/_at_BaganBlog