Powermatic jointer

1
Phone [phone]Fax [phone]Email sales
_at_cutechtool.com
Welcome to the Cutech Tool, LLC
Website - www.cutechtool.com
1641 Bartlett RoadMemphis, TN 38134
Website - www.cutechtool.com
2
Phone [phone]Fax [phone]Email sales
_at_cutechtool.com
ABOUT US
Cutech Tool, LLC was established to warehouse and
distribute planers and jointers in the US market.
Our products are tested and proven to be some of
the best bench top tools in the market place. We
continue to improve our products by refining our
precision in house manufacturing processes and
quality inspection to ensure your are getting the
best planers and jointers available in the market
today.
Visit - www.cutechtool.com
1641 Bartlett RoadMemphis, TN 38134
Website - www.cutechtool.com
3
Phone [phone]Fax [phone]Email sales
_at_cutechtool.com
Planer
1641 Bartlett RoadMemphis, TN 38134
Website - www.cutechtool.com
4
Phone [phone]Fax [phone]Email sales
_at_cutechtool.com
Please read before operating your new planer

• Make certain you also read and follow the
  instructions under the Unpacking section of
  your manual for instructions in cleaning and
  preparing your planer before use.

1641 Bartlett RoadMemphis, TN 38134
Website - www.cutechtool.com
5
Phone [phone]Fax [phone]Email sales
_at_cutechtool.com
Instructions for oil removal from CUTECH portable
planer cutterheadsplaner
Step 1 - Unplug the planer.Step 2 - Place the
planer at a comfortable working height and supply
ample lighting.Remove the dust hood and any
other covers necessary to expose the cutter
head.See manual for helpful instructions.Step
3 - Make sure you lay down rags on the bed of the
planer to catch any residue from the cleaning
process.Step 4 Cleaning of the cutter head
can be done using one of the following options
1641 Bartlett RoadMemphis, TN 38134
Website - www.cutechtool.com
6
Phone [phone]Fax [phone]Email sales
_at_cutechtool.com
Option A - Use an old nylon toothbrush and rags
with solvent, such as mineral spirits or
non-chlorinated brake cleaner, to clean off the
oil. The knives are sharp, be careful not to cut
yourself.
Option B - Using the supplied T-25 T-handle Tore
tool, carefully remove the cutter tips or knives.
Again, be EXTREMELY CAREFUL when handling the
knives or cutter tips as they are VERY SHARP!!!
Separate the knives/tips from the screws and
place in separate containers with a bit of
solvent. 
1641 Bartlett RoadMemphis, TN 38134
Website - www.cutechtool.com
7
Phone [phone]Fax [phone]Email sales
_at_cutechtool.com
Conclusion
After wiping off the head, wipe down any other
crevices, rollers, or any other places where oil
is visible. The object is to remove the grease
before the planer is put into use. Use a
sacrificial board after cleaning to test for
remaining grease. If oil is still apparent,
repeat whichever method you used above.
1641 Bartlett RoadMemphis, TN 38134
Website - www.cutechtool.com
8
Phone [phone]Fax [phone]Email sales
_at_cutechtool.com
Spiral Cutter head Comparison
1641 Bartlett RoadMemphis, TN 38134
Website - www.cutechtool.com
9
Phone [phone]Fax [phone]Email sales
_at_cutechtool.com
1641 Bartlett RoadMemphis, TN 38134
Website - www.cutechtool.com
10
Phone [phone]Fax [phone]Email sales
_at_cutechtool.com
Thank You
1641 Bartlett RoadMemphis, TN 38134
Website - www.cutechtool.com