NTC 405 MART peer educatordotcom - PowerPoint PPT Presentation

About This Presentation
Title:

NTC 405 MART peer educatordotcom

Description:

NTC 405 Week 1 DQs NTC 405 Week 1 Individual Networking Protocols and Port Numbers NTC 405 Week 1 Supporting Activities Differentiated Activities NTC 405 Week 2 DQs NTC 405 Week 2 Individual Transmission Methods NTC 405 Week 2 Supporting Activities Differentiated Activities NTC 405 Week 3 DQs NTC 405 Week 3 Individual Ethernet Switching Modes NTC 405 Week 3 Supporting Activities Differentiated Activities NTC 405 Week 4 DQs NTC 405 Week 4 TCP/IP NTC 405 Week 4 Supporting Activity: Multiplexers NTC 405 Week 5 DQs NTC 405 Week 5 Supporting Activities Differentiated Activities – PowerPoint PPT presentation

Number of Views:14

less

Transcript and Presenter's Notes

Title: NTC 405 MART peer educatordotcom


1
NTC 405 Mart Education Expert/ntc405martdotcom
  • FOR MORE CLASSES VISIT
  • www.ntc405mart.com

2
NTC 405 Entire Course (UOP)
  • NTC 405 Week 1 DQs
  • NTC 405 Week 1 Individual Networking Protocols
    and Port Numbers
  • NTC 405 Week 1 Supporting Activities
    Differentiated Activities
  • NTC 405 Week 2 DQs
  • NTC 405 Week 2 Individual Transmission Methods
  • NTC 405 Week 2 Supporting Activities
    Differentiated Activities
  • NTC 405 Week 3 DQs
  • NTC 405 Week 3 Individual Ethernet Switching
    Modes
  • NTC 405 Week 3 Supporting Activities
    Differentiated Activities

3
NTC 405 Week 1 DQs (UOP)
  • What are the components of network system design?
  • What role do standards play in ensuring smooth
    communication? What role do protocols play in
    ensuring communication of data?
  • What issues would develop if businesses did not
    follow the guidelines setup by oversight
    organizations to control how networks
    communicate?

4
NTC 405 Week 1 Individual Networking Protocols
and Port Numbers (UOP)
  • Resources SkillSoft (2013). CompTIA Network
    2012 Networking Concepts Part 2.
  • Complete the Networking Protocols and Port
    Numbers module in Skillport.
  • Write a memo to a business manager that is not
    familiar with network communication. Describe the
    role of protocols in network communication.
  • Answer the following in the memo in 200 to 300
    words each

5
NTC 405 Week 1 Supporting Activities
Differentiated Activities (UOP)
  • Hands-On Supporting Activity LabSim Network
    2009 1.0 Networking Basics
  • Note. Continue with this module through Week
    Four.
  • Resource LabSim Network 2009 1.0 Networking
    Basics
  • Create a screenshot of the last LabSim page of
    each lesson in the module showing the outcome for
    the section.
  • 1. Press Alt Print Screen on your computer
    keyboard to create a screenshot.
  • 2. Open a blank Microsoft Word document.

6
NTC 405 Week 2 DQs (UOP)
  • How is knowledge about how analog and digital is
    used in relation to your own business or home
    network important?
  • What are the reasons that some businesses have
    not embraced digital entirely and is it actually
    affecting their bottom line?
  • Even though more and more companies are embracing
    the use of fiber-optic cabling, are the benefits
    significant for all types of businesses? Explain
    why or why not.

7
NTC 405 Week 2 Individual Transmission Methods
(UOP)
  • For assistance with this type of assignment,
    review these resources.
  • Address the following in your presentation
  • Describe the various transmission mediums and
    explain the best use of each with various
    examples of business use.
  • Identify communications capabilities of each
    medium and the types of signals that are used for
    each.
  • Identify the various protocols that are available
    for use and provide a recommended standard that
    should be used as the most efficient
    communication within a business.

8
NTC 405 Week 2 Supporting Activities
Differentiated Activities (UOP)
  • Hands-On Supporting Activity LabSim Network
    2009 2.0 Cables and Connectors
  • Resource LabSim Network 2009 2.0 Cables and
    Connectors
  • Create a screenshot of the last LabSim page of
    each lesson in the module showing the outcome for
    the section.
  • 1. Press Alt Print Screen on your computer
    keyboard to create a
  • screenshot.
  • 2. Open a blank Microsoft Word document.

9
NTC 405 Week 3 DQs (UOP)
  • What is the difference between a telephone
    circuit connection and one used for data
    transmission? Why have the lines between these
    transmissions methods blurred over time?
  • What are different modes of circuit and
    packet-switched networks?
  • Although most businesses have looked towards the
    use of T1 or greater connections in the past, how
    has the use of DSL, ATM, cable modems and fiber
    changed how businesses maintain data
    communication in their companies?

10
NTC 405 Week 3 Individual Ethernet Switching
Modes (UOP)
  • Ethernet is a common method of moving packets
    along a network. Review the Advanced Ethernet
    Switching modes in your Business Data Networks
    and Telecommunications textbook.
  • Write a 4 to 7-page paper describing these modes
    and how they might be used in today's global
    network environment.
  • Include the following in your paper
  • Distinguish the basics between channels and
    circuits.
  • Explain the concept of Ohm's law and its
    importance to circuit troubleshooting.

11
NTC 405 Week 3 Supporting Activities
Differentiated Activities (UOP)
  • Hands-On Supporting Activity LabSim Network
    2009 5.0 Network Implementation
  • Resource LabSim Network 2009 5.0 Network
    Implementation
  • Create a screenshot of the last LabSim page of
    each lesson in the module showing the outcome for
    the section.
  • 1. Press Alt Print Screen on your computer
    keyboard to create a screenshot.
  • 2. Open a blank Microsoft Word document.
  • 3. Press Ctrl V on your keyboard to paste the
    screenshot into the document.
  • Supporting Activity Channel Estimation

12
NTC 405 Week 4 DQs (UOP)
  • What are the pieces of the TCP/IP protocol suite?
    How do they match with the various layers of the
    OSI model as described in previous courses?
  • What other protocols are available and can they
    be used in conjunction with TCP/IP? Explain why
    or why not.
  • How does equipment such as the multiplexer make
    TCP/IP more efficient?

13
NTC 405 Week 4 Supporting Activity- Multiplexers
(UOP)
  • Write a 200- to 300-word short-answer response to
    the following questions
  • Multiplexers are used to help companies minimize
    their network communications costs. How do they
    work and what types of equipment are needed?
  • With the newer gigabyte equipment and increased
    use of fiberoptic cabling, are multiplexers as
    necessary as they once were? Explain why or why
    not

14
NTC 405 Week 4 TCP-IP (UOP)
  • Write a 4-7 page paper including the following
  • Analyze the current options available for use of
    TCP/IP and OSI models for businesses.
  • Research options for improving the current use of
    TCP/IP and recommend new software and equipment
    thats available.
  • Describe how use of equipment, software, and
    multiplexing could aid in improving use for
    communications which would reduce network
    congestion. Use APA formatting for the paper.

15
NTC 405 Week 5 DQs (UOP)
  • What types of topology have you noted in your
    place of employment or your home network?
  • What do the various types of NOS have in common?
    What are the benefits of each and on what do you
    base your decision of choice?
  • Are there some types that would be more
    beneficial to specific businesses? How do you
    actually work with each NOS?

16
NTC 405 Week 5 Learning Team Final Learning Team
Paper Presentation (UOP)
  • Resource University of Phoenix Material Final
    Learning Team Paper and Presentation
  • Submit the final Learning Team paper and
    presentation.

17
NTC 405 Week 5 Supporting Activities
Differentiated Activities (UOP)
  • Supporting Activity Topologies
  • Write a 200- to 300-word short-answer response to
    the following
  • What are the main topologies used in computer
    networks?
  • What are some of the lesser used topologies?
    What are the advantages and disadvantages of
    each?
  • Hands-On Supporting Activity LabSim Network
    2009 5.0 Network Implementation
  • Resources LabSim Network 2009 5.0 Network
    Implementation

18
NTC 405 mart Education Expert/ntc 405martdotcom
  • FOR MORE CLASSES VISIT
  • www.ntc405mart.com
Write a Comment
User Comments (0)
About PowerShow.com