How to Install Resin Floors - PowerPoint PPT Presentation

About This Presentation
Title:

How to Install Resin Floors

Description:

The first step in basic application involves placing a primer coat that prepares the surface and provides a base for the resin to adheer. After the self-leveling coat and any added flakes have set, we top the floor application with a top coat to seal it. – PowerPoint PPT presentation

Number of Views:58

less

Transcript and Presenter's Notes

Title: How to Install Resin Floors


1
How to Install
Epoxy Resine
Floors
  • By 3d Royal Floors

2
About Epoxy Resin Floors
  • Epoxy coatings are fantastic products that can
    create great seamless resinous floors.
  • A range of self-smoothing pigmented Epoxy Resin
    floor screeds available in a wide range of
    colours. Suitable for areas subject to foot
    traffic, forklift and vehicular traffic, such as
    factories, garages, showrooms, workrooms and
    industrial applications.

3
Here are the top 7 steps
4
Surface Preparation
  • A surface needs to be properly prepared. This
    means it should be
  • clean
  • dry
  • dust-free and
  • the substrate must be ground or shot blasted

5
(No Transcript)
6
  • Solvent based Epoxy products do not bond well
    with humidity
  • the surface is completely dry
  • no pipes or taps dripping
  • no rising humidity from beneath the ground

Surface Preparation
7
(No Transcript)
8
  • This happens when the Epoxy floor product is much
    stronger than the substrate (for example low
    quality cement)
  • What ends up happening is that you dont actually
    have the epoxy layer detaching from the cement

Substrate
9
(No Transcript)
10
  • Floors experience heavy wear and tear Dont
    assume the industrial floor screed will simply
    just stick to the substrate. Always make sure
    that the primer is suitable for the substrate

Use suitable primer
11
(No Transcript)
12
  • Make sure the substrate is compatible for epoxies
    both in terms of adhesion as well as tensile
    strength.
  • For example never coat epoxy on wood!
  • Wood is far more flexible than epoxies which
    leads to the epoxy cracking simply because it
    cannot follow the expansions of the wood floor.

Compatible Surface
13
(No Transcript)
14
  • All oils, greases, residues must be properly
    cleaned before attempting any type of fresh
    coating. Dont expect proper bonding otherwise.

Contaminated Floors
15
(No Transcript)
16
  • This was caused by a faulty mix between the resin
    and the hardener
  • Mixing incorrect or inaccurate proportions of the
    components
  • Not mixing the material properly or for a long
    enough time

Mix the Resin and the Hardener
17
(No Transcript)
18
(No Transcript)
19
(No Transcript)
20
(No Transcript)
21
Contact
  • 3D Royal Floorsinfo_at_3droyalfloors.co.uk
  • Complete set available atwww.3droyalfloors.co.uk
Write a Comment
User Comments (0)
About PowerShow.com