Building The Perfect Wilderness Campfire In RV Camping

1
Building The Perfect Wilderness Campfire In RV
Camping
Here's how you can prepare for building the wood
campfire during RV camping Southern California
that would surely not impact on the environment!
2
Opting For The Site

• When choosing for the site while camping Southern
  California, it is pivotal to consider that pick
  the place that must be sheltered.
• However, it has nothing around or above it that
  could catch fire. If the fire already exists,
  then it would be better to use it do not build
  a new one.

3
Creating The Hole For Campfire

• First of all, gather some rocks create the hole
  area in a circle.
• In order to create a fire bed, clear the area
  within the fire hole or pit, since, by doing so,
  it will protect the ground as well as make it
  easier in order to scatter ashes when you will be
  done with that.

4
Accumulate Fuel

• The next thing is that gather wood from your
  surroundings. Therefore, start up with tinder. It
  has to be very dry in order to get fired within
  in few minutes. Because wet wood can't work for
  it.
• The bark or pine needles can make good tinder in
  order to better tinder.
• For making it better, you will need larger
  branches in order to put on top of the tinder.
• On the other hand, the armful tinder provides 45
  minutes of burning time.

5
How To Build The Fire

• Start by putting around the tinder on the fire
  bed for the tipi construction.
• Push 3 sticks in the area at an angle in order to
  create the tipi.
• In order to build up the structure, add up more
  kindling. Bear in mind that do not pack them so
  dense oxygen would not be able to flow.
• Eventually, in order to create a tripod over the
  fire for any purpose, you can also use thicker
  straight branches.

6
Lighting Up The Fire

• Start with the bottom of the tinder in order to
  lighten up the fire with the help of a match.
• Once the fire has embarked gradually, then add up
  some wood to keep it going.