Preventive maintenance

1
Preventive Maintenance System
2
What is PMS?

• Preventative maintenance is about performing
  maitenance on a piece of equipment to minimize
  the risk of failure. Preventative maintenance is
  performed even if the equipment is working, so
  that it does not break down unexpectedly.

3
Why eresource PMS ?

• eresource Preventive Maintenance System helps
  you to work at full efficiency creating
  profitable uptime, while reducing downtime.
• Reduces the chances of complete machine
  breakdowns.
• Problems are recognized earlier with a preventive
  maintenance plan.
• Reduces the chance of emergency repair calls.
• Preventive maintenance will reduce the
  possibility of unnecessary repairs.
• Reduces late deliveries that may occur due to
  down-time machinery.

4
Benefits
PMS
Extended Equipment Life
Saving on Repair
Minimize Failure Risk
5
Module
Dashboard
6
Dashboard
The main screen of PMS is the Dashboard.
Dashboard would give visibility of all activities
on-board, likewise Maintenance Activity Pending
today, Activities Pending till date, maintenance
schedule, Person on board, Stop Card Issues ,
Health and Safety, asset breakdown Everything
on single DashBoard,
7
Job Card
Preventive Maintenance job card in which details
of a job to be performed is captured. It is used
as a means to authorise and instruct the
Maintenance People to take up the Maintenance
work. The content and formats of the job card are
all populated from the Asset Master.
Activity Name is poulated from the Pre-defined
Maintnenance activity defined in the Asset
Master. Standard Observation, Lower Limit,
Upper Limit and Tolerance is also populated as
per the standards defined in the Asset
Master. Last Observed Date is the Observation
ityduring the Last Maintenance performed Dated
On Shows the last date when the Activity was
performed Actual Observation. Capture here the
Observation and Activity description performed
now. Start time and End Time This is specific
to the activity. Status Select the status.
Status can be Open/Completed OR in-progress.
8
Stop Card
The STOP program is a behavior-based safety
program. It is designed to prevent injuries and
occupational illnesses in the workplace. This
form is used to capture the details of
observation ,observer, location, and you can
also keep record of action took place for the
observation
9
Break Down Ticket
This is a form where you can log the asset
breakdown ticket
10
Let's get Social
www.eresourceerp.com pms.eresourceerp.com hrms.ere
sourceerp.com nfra.eresourceerp.com
11

• Registered Office
• eresource Infotech Private Limited,
• TMA House 1st floor, Road No. 16,
• Plot No. 6,Wagle Estate ,Thane (West)
• Tel [phone] to 91 22 41118050 (50
  Lines)
• Dubai
• P O Box 52034, Dubai UAE
• Mobile Number 0097155 9018499
• Email sn_at_eresourceinfotech.com