FLUSHING SERVICES

1
FLUSHING SERVICES
2

• BioKem Oil Services have the manpower and
  equipment to perform turnkey oil flushing
  services anywhere in Australia.

3

• BioKem has the equipment and the know-how to
  perform on-sight oil flushing and oil reclamation
  services. Are you having trouble achieving OEM
  Turbine Start-up specifications?

4

• After new fabrication or repair of piping and
  tubing, it is important to flush the lines to
  remove all foreign debris (welding slag, dirt,
  metal fines, etc), thereby preventing premature
  component failure.

5

• Routine Filtration and High Velocity / Hot
  Oil Flushing Services are an important part
  of preventive maintenance for all
  rotational equipment and systems. The damaging
  effects of particulate contamination have been
  well documented with regards to
  premature component wear and failure.

6
(No Transcript)
7

• One way to ensure optimal system cleanliness is
  to perform periodic flushing. By circulating hot
  oil or a flushing fluid through the piping of a
  system at a very high flow rate, turbulent flow
  can be achieved, which dislodges particles that
  would otherwise cling to the walls during laminar
  flow.

8

• These particles are then removed from the piping
  as the fluid is circulated through a series of
  high-efficiency filter elements. We have
  state-of-the-art High Flow Filtration Equipment
  and experienced technicians to perform a wide
  array of filtration and flushing services at your
  jobsite.

9
TURBINE LUBE OIL FLUSHES

• BioKem Oil Services and our Melbourne and USA
  based suppliers have performed numerous Lube Oil
  Flushes on both gas turbines and steam turbines
  by General Electric, Siemens-Westinghouse, Toshiba
  , Alstom, and others.

10

• We are able to quickly and reliably meet or
  exceed OEM start-up cleanliness specifications of
  ISO 16/13/10, and our jobs typically take 4 to
  7-days or less per turbine. Main feed and return
  lines vary in size from 2 inch to 8 inch, which
  can all be effectively flushed using
  our equipment.

11
(No Transcript)
12
EHC SYSTEM FLUSHES

• Utilizing special filtration systems designed
  with viton seals specifically for use on
  phosphateester fluids (like Fyrquel) we can
  perform complete Electro-Hydraulic Control (EHC)
  System Flushes at power plants around the country.

13
HYDRAULIC CONTROL PANEL / POWER UNIT FLUSHES

• Before delivering Hydraulic Control Panels
  or Hydraulic Power Units to a customer, manufactur
  ers must first flush their systems with either
  hydraulic oil or water glycol to remove
  all particulate contamination.

14
RESERVOIR CIRCULATION / CLEANING SERVICE

• We can provide filtration equipment and manpower
  to circulate a reservoir (Lube Oil, Hydraulic
  Oil, etc) quickly achieving very low particle
  counts to meet or exceed a customers cleanliness
  specification. Services include manual wipe-down
  of the reservoir with lint-free rags, if desired.

15

• We utilize high flow flushing skids equipped with
  oil heaters to generate turbulent flow
  (Reynolds number gt4000) and an effective flush.
• Turbine lube oil systems
• Hydraulic power units and presses
• Gearboxes
• EHC systems
• Large diesel engines

16

• Our flushing systems are equipped with high
  efficiency pleated Microglass filter elements
  rated Beta(c)1000 per ISO 16889 to quickly and
  reliably achieve very low particle counts to meet
  or exceed an ISO 16/14/11 cleanliness level.

17

• To know more information, visit us

http//www.biokem.com.au/