Title: Raspberry Pi Products & Accessories in Thailand
1Raspberry Pi Products Accessories
- BotnLife - Online Thailand Shop for Wearable
Hi-tech Electronics Devices Raspberry Pi
Products
2Raspberry Pi Model B 512MB RAM
3Raspberry Pi Model B 512MB RAM
- Raspberry Pi Raspberry Pie-board computer was
developed in England to build a learning
computer. Designed by Broadcom BCM 2 835 System
on a Chip (SoC) processors, ARM 1176th JZF-S 700 M
Hz, VideoCore IV GPU, and memory
size. 512 MB ??paddle designed without
memory. (Hard disk drive or solid-state drives),
but rely on the SD card to boot and to a storage
unit. - Raspberry Pi Model B upgrade from the
original. The port USB rise ,increasing
pin GPIO, improve the capacity to better , more
holes drilled four holes for assembly and
numerous other teams called raspberry pie, take
suggestions. Collected over three years to
develop the model B this. And the same price!
4Raspberry Pi Model B Starter Pack
5Raspberry Pi Model B Starter Pack
- You are about to start a project out of the
rowing course you have to solder, without
programming. They must also wear a heart inventor
and much more, we need to start your first step
is very simple. We collect the devices that we
think is best for a beginner kit is easy to use. - This unit will gather important such as the power
unit, Raspbian SD card, Case, WiFi adapter,
console cable, and other components for the
initial prototype for this is the crucial point
that you begin to jump. - Accessories are not included in the Raspberry
Pie B !
6Pibow Coupé - Enclosure for Raspberry Pi Model
B Computers
7Pibow Coupé - Enclosure for Raspberry Pi Model B
Computers
- Case Pibow Coupé design for protecting raspberry
pie Model B with a slim and transparent acrylic
cover on top of the pie for show. - Produced by the use of laser-cut acrylic and be
stacked to protect your pie. You can also access
the main GPIO ports and the camera has the same
case Coupé weighs only 61 grams, extremely light. - This case is not designed to be used with the
Model A and B when ordering, you will receive
only the case for excluding the raspberry pie.
8Rainbow Pibow - Enclosure for Raspberry Pi Model
B
9Rainbow Pibow - Enclosure for Raspberry Pi Model
B
- Customize your pie with a rainbow Rainbow Pibow
Enclosure This case is the case with rich
colors. Raspberry pie for protecting your B . - Produced by the use of laser-cut acrylic and be
stacked to protect your pie. And closed with a
final layer of clear acrylic. Make timeless,
durable and distinguished by colors. The case is
lightweight and can be attached to any
surface. You can also access the camera and GPIO
port is unchanged. - This case is not designed to be used with the
Model A and B when ordering, you will receive
only the case for excluding the raspberry pie.
10HDMI 4 Pi - 7" Display 1280x800 (720p) IPS -
HDMI/VGA/PAL/NTSC
11HDMI 4 Pi - 7" Display 1280x800 (720p) IPS -
HDMI/VGA/PAL/NTSC
- TV screen resolutions up to 1280x800 for pies
screen 7 "(17.8 cm) and easy to connect via the
DC transformer. And connect the digital via HDMI
or VGA control buttons on the front for you to
adjust the brightness, color, contrast with your
purchase, you get a screen, transformers, and
stand, which can be assembled by using 4 screws.
and the bottom has a compartment for connecting
the camera to a 1 / 4-20 In addition to sharing
the pie then. You can also work with other
devices through HDMI, VGA or NTSC / PAL output
for connection to the site. You can adjust the
config.txt more details, read more here. - You can connect to a 5-24V DC power from the
transformer 9VDC you get when ordering.
12HDMI 4 Pi 5" Display (no Touch) w/Mini Driver -
800x480 HDMI
13HDMI 4 Pi 5" Display (no Touch) w/Mini Driver -
800x480 HDMI
- A monitor screen size of 5 "high resolution
800x480 for embedded system wants to monitor
small and affordable. Designed to screen works
with a driver board that can draw power from a
USB port, the TTL with the board works with HDMI,
which can be connected to a paddle, or HDMI
device, such as BeagleBone Black can be used
immediately when connected via USB. to supply 5V,
500mA. - Because non-IPS (In Plane Switching) makes it
ideal for a straight-sided only. If you want to
view multiple angles We suggest you use the HDMI
IPS 7 "or 10". - The controller that comes with the PCB to adjust
the brightness, color, contrast, and is available
as a signal input as well. - In addition to sharing the pie then. You can also
work with other devices through an HDMI
connection with a paddle.
14Raspberry Pi Products Accessories
15Raspberry Pi Products Accessories Order Online
- If you have any questions, need advice or Order,
Payment - Bots and Lifestyle Ltd
- ? Address 51/9 Moo 7. Rat Development (Bangkok)
Road / Saphan Sung Bangkok 10240, Thailand - ? Web www.botnlife.com
- ? Email customercare_at_botnlife.com
- ? Line ID botnlife
- ? Phone 0972584994
- ? Facebook Page www.facebook.com/botnlife