About alignment and misalignment together with the motor shaft

1
Making Use Of The Various Motor Shaft Alignment
And Its Benefits Drawbacks Of Motor Shaft
Atlas Rigging Transfer Google Plus
https//plus.google.com/117815962540287465418/ab
out
2
Introduction
To have the perfect machinery as well as its
parts done in the most likely manner, it is
essential to move the equipment inside the design
limits up to the standard. The machinery that is
installed misaligned doesnt mean poor motor
efficiency. It is essential to make sure that
alignment is true with the centerlines and shafts
in place before beginning to use this equipment.
3
Pros Of Motor Shaft Alignment And Drawbacks Of
Motor Shaft Misalignment

• Benefits Of Motor Shaft Alignment
• Increases the working efficiency of the
  machinery.
• Makes sure that program of control is simple and
  efficient from the motor to the driven gear
• Cons Of Motor Shaft Misalignment
• This might cause a great deal of vibration
• Noticeable noise can bring about more problems
• Bearings start to get quite hot.
• The bearings and shaft have got a shorter working
  life.

4
Three Basic Categories Of Motor Shaft
Misalignment

• 1. Angular Misalignment The case with the
  angular error often relates poor alignment of the
  equipment (at the wrong angle). It rewards if the
  motor and centerlines cross and not continue with
  a similar centerline. While comparing the gaps
  between the slop of motor shaft and slope of
  still machine shaft, you could have vertical,
  horizontal or both type of misalignments which
  can cause serious harm to the motor attached and
  the equipment in use. 2. Parallel Misalignment
  If various centerlines correspond however do
  not share the same line, this can result in
  parallel misalignment. The two plans of parallel
  misalignment are
• Shafts probably make up for horizontal side,
  displacing to the left or right
• Shafts could be offset vertically, placing at
  several altitudes
• Both can apply
• 3. Understanding Combination Misalignment This
  is the mix off the previously mentioned issues. A
  serious issue occurs when both the angular and
  parallel misalignment occurs.

5

• Atlas Rigging Transfer is associated with
  Rigging, Hoisting and Machine Moving Services
  since 30 years. It also has expertise in
  Consulting Services, Industrial Rigging Services,
  Metal/ Steel Fabrication, Machine Electrical
  Installation Services. You can Contact Atlas
  Rigging Transfer through,
• Website
• http//www.atlasrigging.net/
• Alignment Machine
• http//www.atlasrigging.net/atlas-bfc/industrial-m
  odification-installation/machinery-alignment-commi
  ssioning-plants/
• Follow on Google Plus
• https//plus.google.com/117815962540287465418/abou
  t