How to copy DVD movie using DVDFab DVD Copy Full Disc mode (1)

1
DVDFab DVD Copy

• DVDFab DVD Copy is popular worldwide, and is
  known for its power and flexibility. It enables
  you to copy a DVD with six modes with few clicks
  and customize the output with DVD Copys many
  settings. Here well look at tutorials with Full
  Disc mode.

2
How to copy DVD movie using DVDFab DVD Copy Full
Disc mode?

• First startup DVDFab, load the movie disc to the
  drive, and let DVDFab load it automatically. If
  the DVD source is saved on your hard drive, you
  can use the Add button to browse for the
  source, or simply open the source in windows
  explorer, and then drag and drop it to DVDFab
  like DVDFab says in the middle of its interface.

3

• After the movie is loaded, you will have the
  below main interface. On the left panel, you can
  change the movie name before the copy process
  starts. Near the bottom, decide where you want to
  save the output file by changing the SAVE TO
  location. For Copy option, you will have three
  options, which are standard DVD structure folder,
  ISO image file, as well as your burner. If you
  choose your burner/drive as SAVE TO, you will
  burn the movie to blank media directly.
• As you know, there is single layer disc (DVD5) as
  well as dual layer disc (DVD9) for output. Please
  choose one of the outputs according to your need.

4
(No Transcript)
5
The Compression ratio will change according to
the output you select. Lets take the below one
as sample 7280MB is the file size of the
original movie, while 4300MB is the size of the
output file.
6
The output file size can be adjusted in the
Common Settings window. But we would suggest you
keep the default one (4300MB) which is considered
as the safest option for most of the burning.
7
You can also hit the Advanced Settings button to
open the advanced settings window where you can
make some change to the file you gonna output.
8
As a note, if the movie itself doesnt contain
any DTS audio track, the Remove DTS option will
be grayed out. And the option about Remove
menus can only be selected or unselected when
you use Customize mode.
9
For the Navigation part of the Advanced Settings,
as the message states, you will need to go to the
Common Settings window to manage it as it is
relative to the Pathplayer feature.
10
Finally, after all the settings you might need to
adjust, here simply hit the green START button to
start the process.There will be two casesOne
is that you choose to output and save on your
hard drive the process will start right after
you hit START.
11
The other is you choose your burner as output,
where you will be asked to insert a blank media
first before the copy and burn process start.
12

• Wait till the process completes Or go to sleep
  choose one of the options in the drop down list
  of When all tasks are done near the bottom of
  DVDFab.
• OK. Done. Enjoy fun!