Rear view mirror camera for vehicle

1
V110 Rear View Mirror

• Copyrights cheapcarcamera.com

2
Structure

• 1.DC power port 2.USB/GPS port 3. AV OUT port
  4.on/off 5.power/record led 6.menu 7. Mode
  8.Bluetooth microphone 9.Bluetooth hands-free
  key 10.up 11.down 12.Bluetooth led 13.REC/OK
  14.microphone 15. TF card slot 16.reset 17.
  camera 18.screen

3
Features

• 1 Supports multiple video formats, such as
  1080P,720P 480P, AVI file formats, image effect
  is superior,
• 2 built-in microphone/speaker
• 3 support high capacity TF card
• Loop video, seamless coverage video
• Automatically taking video when start the car, it
  will turn off automatically delay 5 seconds after
  car is shutdown
• Supports video and AV signal output
• Stop monitoring, low frame rate video recording
  features, enhance the TF card space exception
  recovery high frame rate video, restoring clear
  site
• 8. Bluetooth hands-free calling to improve
  driving safety
• Large screen displays, surface design of the
  rear-view mirror, upgraded Visual angle

4
Product Specifications
Screen size 4.3inch HD TFT
PIXELS 1.0MP
LENS 120degree wide angle lens
Min LUX 1LUX
Video resolution 1080P/720P/480P
Video format AVI_at_MJPG
frames 30fps
Image resolution ?12M/10M/8M/5M/3M/2M/VGA/1.3M 5M/3M/1.3M
Image format JPG
Motion detection support
Cycle recording off/30s/1min/2mins
Memory card TF card
capacity MAX 32G
USB port USB2.0
Power port DC12V
Optical frequency 50HZ/60HZ
battery 650mAH
Microphone/speaker support
AV out support
language English/German/French/Spain/Italy/simplified Chinese / traditional Chinese/Russian/Japanese Chines//Chinese/Japanese/Portugal/Russian/Korean  
weight(no battery)  
size  
5
Rear view mirror

• The boot has two kinds of methods in the off
  state, short press ON / OFF key, DVR
  automatically enter the video mode and start
  recording, lights the machine in the shutdown
  state connected car charger, DVR automatically
  enter the video mode and start recording, unplug
  the charger after DVR automatically shut down and
  save the video file.
•  
• Note the machine is not inserted SD card, the
  boot after the LCD screen display" memory card
  error".
• Shutdown DVR in power-on state according to the
  ON/OFF key, the machine shutdown.
• Note when battery power is insufficient, display
  the electricity shortage in the DVR, automatic
  shutdown and save the video file.

6
Battery charging

• Two kinds of charging methods
• A. USB charging.
• B. Using a car charging source charge.
• Light red light in the process of charging the
  long bright, full of red light is off.

7
Install a memory card

• Insert the memory card into the slot as
  silk-screen indication, until you hear the sound
  of the "card".
• Memory card remove Push forward the memory
  card. It will be pop up. (It is better to remove
  in the shutdown status, to avoid damaging memory
  card.)

8
video

• 4. Press the on/off key to boot directly into the
  video State, green light flashes, press the OK
  key to stop recording and save the file, DVR goes
  into standby mode. In the video or photo mode,
  press the UP key to put the screen into
  screensavers, make the machine work longer, and
  drivers can use it as the rear-view mirror in
  recording process, press the on/off key to turn
  off or turn on the recording.
•  
• 5. In standby mode press the MODE button to enter
  the camera mode, press the OK button to take
  pictures, and hear the horn beep
•  
• 6. In standby mode, short press the MODE key
  twice the machine enters the playback mode, press
  the up or down key to select the Preview file,
  press OK key to play or stop When you play back
  video, long press up key for fast forward and
  down key for back. If you want to delete the
  file, press the MENU key to access the Delete
  menu, press the up or down key to select "delete"
  and press the REC/PLAY key to enter again
  "delete current" or "delete all" and press the
  REC/PLAY key to enter to confirm and return to
  the Delete menu. Press the MENU key to exit the
  Delete menu, returns to playback mode.

9
Operation

• 7. During the recording process, press the MENU
  key machines into SOS protection, is forced to
  save the file at this time, which does not
  participate in cycle cover(MENU button is pressed
  before the video segment 10 seconds, forced to
  save the current section and the previous section
  of the file. Press the MENU button after 10
  seconds of the video segment, forced to save the
  current paragraph and the next paragraph file
  Press the MENU button between the first 10
  seconds and 10 seconds after, it forced to save
  the current files of video
• 8. It can support G Sensor (gravity sensor),
  during taking video, when the vehicle suffered a
  great impact, gravity sensors works,it Is forced
  to save the file at this time, does not
  participate in cycle covers the file, save the
  file as with SOS
• 9. Recording while parking
• In standby mode, enter the menu setting "stop
  recording" is "open" , during the recording
  process, machine into 5 frame after 10 minutes of
  video, when the vehicle moves, the machine will
  become a video of 30 frames when the vehicle and
  then 10 minutes of access after 5 frames of
  video, to save TF card space

10
Operation 2

• 10.AV OUT
• Through AV connection cable with the TV, monitor
  or car DV and then turn on the car DVR you can
  directly enter the monitoring preview mode.
•  
• 11. G-MOUSE plug into the USB interface, as
  shown in the following picture
• Press ON/OFF key to turn on the machine, the
  image X of G-MOUSE will disappear and Flash which
  means that in searching signals, wait 40S, when
  the icon is no longer flashing, it indicated that
  it has received signals, please read the CD
  contents about the detailed installation of
  G-MOUSE.

11
Bluetooth -Optional

• The machine connected with bluetooth device can
  transfer music of the bluetooth device.
•  
• This machine with other Bluetooth device to
  establish a connection, by short pressing the
  Bluetooth key to answer and end calls, to ensure
  the road driving safety
• 1) Turn on bluetooth after powering the
  machine, press the Bluetooth hands-free key for 5
  seconds, until the Horn was given a "drop of dub"
  tone, while blue lights flash two times, then
  releasing the button, Bluetooth was started
  successfully, at this point the blue led Flash
  two times once every 2 seconds, searching the
  last connected Bluetooth device, if it connected
  Bluetooth device successful, the blue indicator
  light flashing once every 2 seconds.
• This Bluetooth of the machine started will
  automatically search latest connection of
  Bluetooth equipment, within 10 minutes havet
  search the last of equipment, Bluetooth
  automatically closed, if found would
  automatically connection this machine( if the
  machine connected with you machine, next time
  will connect automatically when your bluetooth
  turns on may also due to each equipment of
  Bluetooth version differences, needed manually to
  connect.
• 2). Turn off Bluetooth Bluetooth boot state,
  long press the Bluetooth key for 5 seconds, until
  the Horn was given a "drop of dub" tones, blue
  light is off, Bluetooth entering the shutdown
  state.
• 3). Bluetooth pairingIf you want to establish a
  connection with a new Bluetooth device, the
  machine boot and long press the Bluetooth
  hands-free key for 10 seconds, heard the Horn was
  given a "drop of dub" beep, and then "drop" tone,
  while blue lights flash continuously release the
  button, enter the Bluetooth pairing mode.
• you can connect with the mobile phone, computer
  and other Bluetooth devices, the Bluetooth module
  of the machine named for BDK, if it connected
  successfully then can be used.
• Note this Bluetooth only one-to-one to connect,
  if you want to connect to another Bluetooth
  device, disconnect the former device, if devices
  are not within the reception range of the
  Bluetooth also shows disconnection.

12
Options and system settings

• In standby mode, press MENU to enter the setup
  menu interface, press the UP button or down
  button to select the setting item, the OK button
  to confirm enter the set of function parameters
  interface, and then press UP key or DOWN key to
  select the specific parameters, and finally press
  OK to confirm after setting, then press MENU key
  can exit. Specific menu subdirectories see the
  following

13
Connected to the computer

• Download of video and photo data
• 1. When the USB cable to your computer, Red power
  
• Of the camera lights, the screen appears "memory"
  
• PICTBRIDGE and "camera" option, As indicated in
  Figure 5
• Select memory, the machine screen black, the
  computer will automatically recognize the
  "removable disk".
• Can use your computer to browse and manage files.
• When you select PICTBRIDGE, you can print files
  in the TF card.
• Select the camera, the machine can be used as
  instant messaging software video tools.
• Press ON/OFF key turn off and charging, the red
  light bright while connected
• Note When using this product improper operation
  caused the crash phenomenon, the available small
  hard object, tap the RESET reset hole button and
  then boot the machine return to normal.

14
About Us

• 1. We are rear view mirror manufacturer in China.
• 2. We accept both wholesaler and retailer.
• 3. We built online shop for world.
• 4. Our domain page
• http//www.cheapcarcamera.com/rear-view-mirror_c21
  .html
• 5. Our email cardvr_at_cheapcarcamera.com