Magnum Force System for Spray Painting

1

• Magnum Force System for Spray Painting

2

• Five major areas of concern with paint jobs

• Vehicle preparation
• The people
• The compressed air system
• The paint booth
• The paint itself

3

• Lint and dust float for days and always end up a
  problem in finishing.

4

• Wipes break down and leave fibers behind.
• Feather dusters breakdown and add unwanted
  particulate
• to finishes.

5
Cotton mops can be another source of
trouble.Sponge mop should be used.
6
Static voltage on primer/plastic filler causes
uneven coating in Electrostatic Painting.
7
Dust in the air can be chargedby static
electricity.The dust will be attracted to the
part being painted.
8
THE SOLUTION . . .
9
SIMCO Magnum Force System
10
SIMCO Magnum Force is an electrical Air Knife
System.It provides deep penetration with high
velocity ionized air.
11
Option 1 is blow-off only. Option 2 is blow-off
with ionized air.
12

Option 1 is blow-off only. Option 2 is blow-off
with ionized air.
13
Air and Ionizing Nozzles
Ionizing Air Knives
Complete System
14
Magnum Force can help to

• Remove lint and dust
• Remove static for even finish
• Remove moisture
• Reduce manpower

15
If you are using compressed air jets/ knife

• Magnum Force will reduce 30 to 70 of operating
  cost

16
Magnum Force System fast payback when compared
with Compressed Air System
17
Major benefits

• Less rework
• Better finish
• Higher output rate

18
Custom design Magnum Force Systems for
different sizes of substrate cleaning
19
(No Transcript)
20
Customer References 
21
References for parts cleaning
22
To return to out website CLICK HERE
To download the Magnum Force Spec Sheet CLICK HERE