TheFibers

1
HUXCleanerTM
Instruction MANUAL
In-Adaptor Ferrule Cleaner
How to Clean
Attention
Insert Cleaning Tip inside adaptor
HUXCleaner-1.25 is precisely designed for the
depth of LC, MU and HUXCleaner-2.5 is for SC, FC,
ST type adaptors each. Turn Rotator With push
approx 200g pressure, turn the Rotator just 12
click clockwise. (For better cleaning specially
in HUXCleaner-2.5, rotate body around 23
rotations before turn Rotator.) Remove and Cap
If not in use, do not remove the Cap to prevent
any contamination.
1. Do not turn over two(2) click and do not push
more than 200g pressure The Rotator should be
turned just 12 click clockwise and the pressure
should be pushed approx 200g when you turn the
Rotator. Warranty void if cleaning fiber is
broken by over clicks pressure.
Rotator
Body
Rotator
2. The cleaning performance may be effected by
contamination and environmental factors. 3.
This unit is disposable so please dispose the
unit as an industrial waste when you feel the
Rotator does not turn smoothly or when the
cleaning fiber is finished. 4. For the better
cleaning specially in HUXCleaner-2.5, rotate body
around 23 rotations before turn Rotator. The
2.5mm ferrule cleaning could be cleaned more
effectively by 1st step (by body) and 2nd step
(by rotator) both. For
1.25mm (LC, MU) For 2.5mm (SC, FC,
ST)
Cleaning Tip
Cap
1.25
2.5
TheFibers C R E AT I V E F I B E R S
TheFibers Inc. 704 Anyang-CityHall, 1590
Kwanyang-Dong, Anyang-City, Korea Tel
82-11-722-9285 Fax [phone]
sales_at_thefibers.com www.thefibers.com