Commercial Glass and Architectural Metal Restoration Systems

1
Commercial Glass and Architectural Metal
Restoration Systems
2
Why problems with glass and aluminum?
Glass and aluminum surfaces are not flat The
pores in the surface makes pollution grip and
makes removal difficult.
3
Causes
Bad or poor maintenance
Heavy Pollution Deposits
Acid Damage
4

• Willems America restoration products are
  specialized to renovate and protect any kind of
  glass (including the metal coating on reflecting
  glass) and any kind of aluminum surface.

5
Microscopic Marker
6
WHERE TO USE AND PROBLEMS WE SOLVE Willems
America products are renovating and protecting
agents, used in solving problems that are
beyond cleaning. We solve problems like Hard
Water stains Concrete Calcium runs and other
run-offs Mineral Staining Acid stains Watermarks L
oss of reflective capacity, shine and
luster Surface Haze Any problem that is not a
physical damage of the surface.
7
The Restoration Process
8
Glass Restoration Process
9
CALC-OFFRemoves mineral deposits, hard stains,
rainbow stains on normal glass

• CALC-OFF renovates and decalcifies glass
  surfaces. The product contains of a micro
  polishing powder in order to remove difficult to
  solve problems. Soft glass types like insulating
  glass units fabricated by Viracon (VE2-552)
  exterior lites must be restored with care. This
  type of is ¼ green tinted heat strengthened
  glass with a Low-E coating on the 2 surface can
  produce a known banded effect when viewed at a
  right angle when in direct sunlight. A jobsite
  mock up is required to determine the number of
  restoration steps and to set a quality standard
  for the overall project.
• A glass surface is not flat. The pores in the
  surface gives pollution a chance to grip on the
  surface of the glass and pollution stuck in these
  pores are normally very difficult to remove.
• During the restoration with CALC-OFF, the
  structure of the glass surface will be changed in
  the way that the glass surface will be flattened
  out. The tops of the glass will be flattened
  out . During this process all existing pollution
  will be removed from the glass.
• The result is a flat glass surface, free from
  pollution. The surface now has a very low
  friction, a fact that makes it very difficult for
  pollution to stick to the surface. In addition,
  Renotec, a silicone based protecting layer may be
  applied to produce a high water and dirt
  repellent on top of the surface, making future
  cleaning easier, cheaper and faster and the need
  for future cleaning will be less frequent.

10
Calc-Off Renotec
Proven Performance
11
RENOTECRestoring agent for removes mineral
deposits soft glass or float glass

• RENOTEC renovates and protects all glass types
  like metal oxide/ pyrolitic coated glass and in a
  one-time application procedure. The product can
  be used to renovate float glass surface as well.
  A reflective glass renovated with RENOTEC will
  obtain a 100 renovation of the reflective
  capacity.
• A glass surface is not flat. The pores in the
  surface gives pollution a chance to grip on the
  surface of the glass and pollution stuck in these
  pores are normally very difficult to remove.
• During the restoration with RENOTEC, the
  structure of the metal coating or the glass will
  be changed. The tops of the glass will be
  flattened out and the pores will be filled up.
  During this process all existing pollution will
  be removed from the surface.
• The result is a flat surface, free from
  pollution. The surface now has a very low
  friction, a fact that makes it very difficult for
  pollution to stick to the surface. In addition, a
  silicone based protecting layer is added on top
  of the surface, making future cleaning easier,
  cheaper and faster and the need for future
  cleaning will be less frequent.

12
Results
13
(No Transcript)
14
Railway Station ATH FLUORCARBON (Acrylic) Before
15
Railway Station ATHAfter
16
Architectural Metal Restoration
Process
17
ALU-CLEANRestoring agent for powder coated
aluminum and painted surfaces

• ALU-CLEAN renovates and protects powder coated
  and painted surfaces in a one-time application
  procedure. The product is developed to renovate
  the paint layer and restores the original color
  of the panel.
• During aging, the top layer of the coating will
  get less compact and pores will occur in the
  surface. The less compact top surface makes the
  color of the paint fade, shadows occur and the
  shine and luster disappears due to UV and natural
  weathering.
• During the restoration with ALU-CLEAN, the
  destroyed, less hard top layer of the surface
  will be removed. New and undamaged molecules of
  the coating will be brought up to the surface and
  restore the original color, shine and luster.
• At the same time, a silicone based protection
  layer will fill up all possible pores and makes
  the surface 25 stronger. The protection layer
  has a very low friction. Therefore ,dirt will not
  stick to the surface so easy, future cleaning
  will be easier, cheaper and faster. Normally the
  surface is cleaned with pure water after
  restoration and the need for cleaning will be
  less frequent.

18
Renu-Alu Pro-Alu
Alu-Clean Professional Results
19
RENU-ALU AND PRO-ALU SystemRestoring agent for
anodized aluminum

• RENU-ALU and PRO-ALU renovates and protects
  anodized aluminum in a two-step application
  procedure. The products are developed to renovate
  the anodized layer without destroying or removing
  it.
• The anodized layer contains of pores where
  pollution easily sticks and is difficult to
  remove. The result is a bad looking, discolored
  surface.
• During the renovation with RENU-ALU, the anodized
  surface will be restored to original looks
  without damaging the anodized layer. All
  pollution on the surface will be removed.
• After restoration, PRO-ALU is applied on the
  surface. PRO-ALU seals up all pores in the
  surface, making the surface low friction and
  glossy. The surface will now get less dirty, it
  will be easier, faster and cheaper to clean.
• The protective coating provided by PRO-ALU will
  wear of within a period of time (in normal cases
  at least 3 years). It will not peel off or come
  off in flakes.

20
BEFORE AFTER
21
Architectural Panels
22
LIFE SPAN FOR PRO-ALU PROTECTION After
application the products will offer a protection
of 2-5 years, depending on the nature of the
surface, quality, age, surrounding pollution
(e.g. airport, heavy industry in the area etc.),
future maintenance of the building etc.