K LINE Cargo Acceptance Guidelines - PowerPoint PPT Presentation

1 / 42
About This Presentation
Title:

K LINE Cargo Acceptance Guidelines

Description:

Certain chemicals have strong odor, which lingers for months and can not be ... condition for acceptance in order to avoid juice/odor problem. ... – PowerPoint PPT presentation

Number of Views:320
Avg rating:3.0/5.0
Slides: 43
Provided by: KMO5
Category:

less

Transcript and Presenter's Notes

Title: K LINE Cargo Acceptance Guidelines


1
K LINE Cargo Acceptance Guidelines
  • CONTQC/CMG
  • June, 2005

2
(No Transcript)
3
Contents
  • Preface (1)
  • Preface (2)
  • Cargo Acceptance Guidelines
  • Bulk cargoes
  • Chemicals with strong odor
  • (UN1334 UN2468)
  • Cold wave container
  • Dangerous goods destined for US inland via US
    rails
  • Hide
  • Hot cargo (1)
  • Hot cargo (2) exceptional treatment
  • Logs/ lumber
  • Magnetic cargoes
  • Malt
  • Military goods
  • Overweight containers
  • Reefer as dry
  • Scrap (Metal, Plastic, etc)
  • Shippers own containers (SOC)
  • Stone products
  • Steel coil
  • Steel products (pipes/sheet/plate)
  • Used parts, machinery
  • Valuable cargoes

4
Contents (continued)
  • Other basic guidelines
  • Cargo screening procedures
  • Container seal inventory control
  • Containers used for DG for US
  • DG placard
  • Guidelines for handling cargo and cargo damage
  • Guidelines for survey arrangement
  • Partlow charts safekeeping
  • Refrigerated foodstuff quarantine
  • Standard vanning policy for dry containers
  • Standard vanning policy for Flat rack containers
  • Standard vanning policy for Open top containers.

5
Preface (1)
  • One year has passed since our first edition
    of KLINE basic guidelines for cargo acceptance
    was issued. While our Guidelines have been well
    penetrated into our colleagues, we have yet seen
    several serious and costly incidents caused by
    only a container with unscreened and risky
    cargoes.
  • Just before preparing this third edition
    (now renamed to Cargo Acceptance Guidelines
    CAG), we carried out an inquiry about cargo
    screening procedures to almost all of our offices
    over the world and learned that there is still
    large room for improvement to protect ourselves
    against risks to take doubtful cargoes from
    unfamiliar customers. The result of the
    investigation is being summarized in the section
    Cargo Screening Procedures, which please
    carefully read to make your current screening
    procedures more effective.
  • Under the circumstances that the cargo
    volume we handle would be expected to increase
    further, we sincerely believe our efforts to
    improve cargo screening method must have very
    important role all the more.


  • KLINE CONTQC/CMG (June, 2005)

6
Preface (2)
  • All FCL (full container loads) container
    cargoes are received in a sealed and SLAC
    (shippers load and count)condition . Therefore
    Kline, as a shipping line, are not in a position
    to know the condition and securing arrangements
    of the contents of each container. It is,
    however, vitally important for us to understand
    cargo nature and securing manner from the cargoes
    description and/or customers business line
    through professional communication with them,
    because the nature of the cargo can cause damage
    to the cargo itself, the container and other
    objects (vessels, people and the eco system,etc).
  • To help prevent such damage, it is
    essential for the entire Kline group to share
    some basic knowledge about cargo types and
    guidelines for cargo acceptance
  • This booklet, which is a summary of
    instructions/recommendations, is compiled for
    that purpose.
  • Please do not hesitate to contact TMO or
    us, whenever you have any doubts upon your
    accepting cargo in light of the guidelines.

  • KL CONTQC/CMG (April 2004)

7
(No Transcript)
8
Cargo Acceptance Guidelines

9
Bulk cargoes
  • The transportation of bulk cargoes
    (unpacked) has below mentioned risks. Minimum
    requirement from CONTQC is proper setting of
    bulkhead to protect container door, but the
    risks should be well considered upon booking.
    TMO may restrict the cargo by their own judgment.
  • Container doors and panels would
    receive strong pressure and easily bulge
  • out by the cargo weight which could
    be further increased by rolling and
  • pitching movement during navigation.
  • Consequently the locking devices of
    the container doors might break and
  • the cargoes spill over.
  • Even if not broken, the bulge out
    itself would bring about handling
  • difficulties.
  • In case of hole/cut damage, the cargo
    would easily suffer wet damage.

10
Chemicals with strong odor
  • Certain chemicals have strong odor, which
    lingers for months and can not be removed easily,
    thus it causes huge extra cost for cleaning and
    deodorizing treatment, and in the worst case,
    total disposal of the unit.
  • In 2003, following two products have been
    identified strong odor chemicals and prohibited
    without any exception.
  • (1) Trichloroisocyanuric Acid (Class 5.1
    UN2468)
  • (2) Crude, Refined Naphthalene (Class 4.1
    UN1334)

11
Cold wave container
  • We sometimes receive inquiry about so called
    cold wave container (container filled with dry
    ice to create ultra-freezing condition) and would
    reconfirm that Klines policy would not allow to
    accept such containers (neither Klines, SOC nor
    Partners) in any occasion due to not fully
    analyzed technical information, possible damage
    to containers and continuous outflow of CO2,
    which may threaten labors safety.

12
Dangerous goods destined for US inland via US
rails(Improper blocking bracing)
  • A lot of containers stuffed with dangerous
    goods are being rejected and ordered to rework by
    US rail due to improper blocking and bracing.
    This brings about our operational inefficiency
    and cost recovery job.
  • In order to avoid such operational
    interruption and extra cost, the shippers who
    were responsible for FCL cargo stuffing, should
    follow the guideline announced by US rails and
    our POL offices are likewise required to
    enlighten them accordingly.
  • Main requirements are
  • Min 2 x 6 inches lumber are required
    for blocking
  • Nails should be staggered side to side,
    not in a straight line, no more than
  • 5 inches apart.
  • Container door must not be utilized to
    sustain cargoes.
  • Pallets should not be utilized as
    securing materials.

13
Hide
  • Hide is basically categorized into two
    types
  • (1) Chrome hide
  • This is half-finished products, which
    would not produce so-called hide juice. This is
  • mainly transported in 40 containers.
  • (2) Wet salted hide
  • This is hide treated with salt and
    brine and would sometimes cause hide juice and
  • leave strong odor in container. 20
    containers are normally used, as wet salted hide
  • is much heavier than chrome hide.
    Perfect packing and lining is prerequisite
  • condition for acceptance in order to
    avoid juice/odor problem.
  • In general, hide requires extra cleaning
    and 7-10days waiting time (due to remaining odor
    problem) after being devanned We do not apply
    overall prohibition policy on this commodity, but
    characteristics mentioned above and problems have
    to be reminded when accepting booking. Certain
    TMO prohibit this cargo as their own trade
    management policy.

14
Hot cargo (1)
  • Hot cargo or hot stuffing can be simply
    defined as reefer cargo that has not been
    sufficiently frozen or cooled down to match the
    setting temperature of the reefer upon stuffing.
  • What is sometimes not understood by shippers
    is the fact that reefer units are only designed
    to maintain temperatures and are not
    designed/able to freeze or cool down rapidly to
    the setting temperature.
  • Therefore shippers should be reminded that
    it is their responsibility to ensure that
    potential cargoes are of a suitable temperature
    prior to being stuffed into reefers.
  • General procedures are not to accept hot
    cargoes , or when it is required to be loaded by
    shippers, their Letter of Guarantee should be
    obtained before shipment.

15
Hot cargo (2)(Exceptional treatment for certain
Asian countries)
  • Despite our general rule stated in item Hot
    cargo (1), certain Asian countries express their
    difficulty to implement our rules perfectly
    because shippers are not fully accustomed to
    freezing or cooling down their cargo to the
    setting temperatures (partly due to lack of
    freezing facility) and unwilling to issue L/G.
  • After interviewing with our Asian
    colleagues, we have compromised and established a
    practical rule, according to which L/G should be
    obtained without fail when the difference
    between the actual temp and setting temp is more
    than 5C (for frozen cargo only). We realize
    this is not legally recommended and subject to
    immediate review when we encounter certain
    problems.
  • In order to avoid any unit disorder which is
    often reported concerning hot cargo stuffing, you
    are requested to advise to your shippers that
    unit should be always shut down during cargo
    stuffing and restarted upon (temporary) door
    closing. You may further have to suggest the
    necessity of manual defrosting, but this has to
    be done after fully consulting with IEC(ECNT) or
    other authorized experts.

16
Logs/Lumber
  • Logs should not be accepted, because they
    cause serious damage to containers during
    stuffing, transporting and un-stuffing.
  • Lumber also has risks of container damage,
    therefore it could be only accepted when their
    method of stowage and lashing is established and
    approved by TMO. If the lumber has been treated
    in any way (i.e. Creosote), then the container
    must be lined or the cargo is to be packed.

17
Magnetic cargoes
  • Magnetic cargoes with strong magnetism may
    seriously affect nautical instruments on board.
    In this regard, before booking magnetic cargo,
    please obtain following information from actual
    supplier.
  • (1) Magnetism leaking out of package. (The
    maximum magnetism to
  • be accepted is 1 gauss)
  • (2) Packing style and material (Magnet
    shield packing is required)
  • Then please send application to Central
    Planner for acceptance, as it may require special
    stowage position on board.

18
Malt
  • Malt shipments to Japan have been regarded
    as very important base cargoes for various trade
    lanes. Due to the sensitivity of this cargo,
    Malt Task Force was set up in April, 2003 and
    General Guidelines for Malt/Hop shipments were
    issued.
  • (Basic policy )
  • Containers condition Food grade status
    (no foul/toxic odor, no bird

  • droppings, oil stain on exterior of container,
    No sharp

  • objects which may tear liner bags, etc)
  • Containers age Not younger
    than 12months and not older than 8 years
  • Liner bags Properly
    fitted inside container
  • Stowage Under deck
    stowage
  • For more in depth details, please refer to
    the Malt Task Force General Guidelines (latest
    issue May 31, 2004).

19
Military goods
  • Weapons, ammunitions and other military
    goods have never been permitted under Kline
    policy and we would like to make it clear that
    this policy remains stringently in force.
  • The range of goods, which have or
    potentially could have, a military or para-
    military application is of course wide and you
    are therefore
  • required to take great care and exercise due
    diligence in this respect upon your accepting
    cargoes. The fact of the shippers and/or
    consignees being governmental bodies does not by
    itself amend this policy.
  • The consequences for the carriage of
    prohibited or suspicious commodities can be
    severe, which could include a vessel being
    refused entry to port, heavy fines and potential
    claims for loss of hire, loss of credit, etc.

20
Overweight containers
  • Overweight (in excess of max payload)
    containers must not be accepted nor loaded in any
    event, as it may cause serious physical damage
    to the containers and, as its result, might
    injure people who handle them. POD terminal
    may reject discharging them or require L/G for
    even slight excess of weight due to safety
    reason.
  • Overweight containers must be detected
    through verification of booking office between
    manifested cargo weight and max payload of the
    containers.
  • In case shippers manifestation is not
    correct, it also can be detected at Terminal gate
    or somewhere else, where the containers are
    actually weighed.
  • Any shippers who are producing over-weight
    containers without taking proper measures should
    be blacklisted and their cargoes should be
    excluded.
  • (There is also another weight restriction
    regulated by local traffic rules, which must be
    followed to avoid any troubles, penalties)

21
Reefer as dry (RAD)
  • Reefer container as dry use (Reefer as dry)
    has been promoted to save empty repositioning
    cost. While this policy would be maintained,
    please be reminded that high-priced freezer or
    complicated structure inside the reefer
    containers might be easily damaged when the
    cargoes are not chosen nor stuffed into our
    containers properly.
  • Please refer to the attached technical
    guidelines for acceptable RAD commodities and
    securing method to be observed during cargo
    operation.

22
Scrap (Metal,Plastic,etc)
  • Scrap metal, plastic, etc are often confused
    with Waste by unscrupulous shippers and tend to
    cause troubles at POD. Therefore it is very
    important to take similar steps described in the
    item Waste in this guideline. Once it is proved
    to be non-waste, the cargo is still needed to be
    well secured in order not to damage our
    containers. Scrap in bulk must not be accepted
    without exception. To order B/Ls should not
    be accepted.
  • In 2002, we are involved in metal scrap
    case which was contaminated with radioactivity.
    This is a health hazard to all who handle the
    cargo and resulted in rejection at POD. All the
    scrap metal should be checked and ensured
    radioactivity free by shippers.
  • In 2003, we are involved in the plastic
    scrap case, which was finally ordered to be
    shipped out by POD authority after staying almost
    two years in the terminal.
  • In both cases, Kline had to bear extra cost
    and exert a lot of efforts to solve the problem.

23
Shippers own containers(SOC)
  • When a booking is received and the cargo is
    to be loaded and shipped in a SOC container, then
    the container should be verified to have a valid
    CSC plate and class certificates (minimum of six
    months validity) and be suitable for ocean
    transport in all respects. It is also highly
    recommendable to sign an indemnity agreement with
    shippers, who indemnify Kline harmless from any
    and all consequences that may arise as a result
    of Klines accepting the SOC.

24
Stone products
  • All stone products can potentially damage
    the container and in the case of slabs and blocks
    and stone products in bulk, the damage can be
    excessive. They are also often proved to have
    exceeded our vanning restrictions (stated in
    Standard vanning policy of this guideline) at
    later inspection at POD.
  • Therefore it is required to carry out
    condition survey at shippers account before the
    shipments, in order to ensure that it is safely
    secured according to KLine standard vanning
    policy.
  • Our containers are also likely to be damaged
    during vanning and devanning operation due to its
    cargo nature or cargo handling method being used,
    therefore on TMOs instruction it is appropriate
    to obtain Guarantee of Payment from shippers for
    any potential container damage.

25
Steel coil
  • Steel coils are not suitable for closed van
    container transportation due to its particular
    shape and heavy weight. It would easily lead to
    heavy container damage or even more serious
    accident involving other containers, vessel, etc.
  • Exception may be granted by CONTQC or TMO,
    provided
  • - Weight of each coil should be less than
    4kt.
  • - Weight/m2 should be less than 2kt.
  • - Choking, securing method should meet
    Klines requirement.
  • Booking offices are required to send
    application to TMO with cargo and securing
    details and obtain their approval in advance.

26
Steel product (pipe/sheet/plate)
  • Steel (metal) product such as pipes/
    sheets/ plates/ingot often causes serious damage
    to our containers due to their particular shape
    and high density, therefore strict observation of
    our standard vanning policy in this guideline is
    required in order to protect our containers from
    any potential physical damage.
  • When you receive booking of the cargo made
    of steel or other metals, please do not fail to
    obtain cargo details (dimension, weight, packing
    style, etc) and securing method for TMOs
    approval.

27
Used parts, machinery
  • Commodities such as used auto parts and
    used machineries, which may contain oil, would
    often cause serious leakage problem during
    navigation. It would not only damage our ships
    and other adjacent containers, but also possibly
    pollute our ocean.
  • Besides, unscrupulous shippers may confuse
    them with unauthorized Waste (please refer to
    item Waste in this guideline).
  • These commodities are only accepted,
    provided
  • (1) Shippers and consignees are
    environmentally conscious and reliable parties,
    who
  • take full responsibility for any
    repercussions, environmental or
    equipment-related,
  • that may result. To order B/Ls
    should not be accepted.
  • (2) Anti-oil leakage treatments should be
    arranged. These include the removal of all oil,
  • the complete plugging of drain
    outlet and general examination of any sign of
  • leakage.
  • (3) Other anti-pollution treatments
    should be arranged. These include the laying of
  • plastic sheets (strong enough for
    folk lift or other vanning /devanning machinery
    to
  • be operated upon it), and the
    scattering absorbent such as saw dust on the
    plastic
  • sheets and the making necessary
    arrangement to prevent oil from spilling out from
  • plastic sheets to containers floor
    board.

28
Valuable cargo
  • For any valuable cargo which includes but
    is not limited to platinum, gold, silver,
    jewelry, precious stones, precious metals,
    precious chemicals, bullion, specie, currency,
    negotiable instruments, securities, writings,
    documents, pictures, works of arts, curios,
    heirlooms, collection of every nature or any
    other valuable goods whatsoever including goods
    having particular value only for Merchant, you
    must seek approval from TMO in advance.
  • It should be noted that Kline is not
    covered under its normal insurance policy for any
    claims for valuable cargo, therefore it is
    necessary for Kline to obtain special insurance
    cover for these types of cargo. TMO is requested
    to contact GALG for insurance coverage before
    accepting the cargo.
  • It should be also noted that proper
    security measures must be worked out and
    implemented while the cargo is under our custody.

29
Waste
  • Waste often causes serious problems, as
    international conventions such as Basel
    convention and national regulations are not fully
    recognized by concerned parties. Besides a
    waste, which is accepted today, might be banned
    tomorrow, because of change of regulations as a
    consequence of ardent environmentalist movement.
    It is perfectly possible for the carriage of
    certain types of this class of cargo to reflect
    negatively on Kline.
  • Therefore if you have to take waste cargo,
    you must obtain TMOs approval after confirming
    following points.
  • The commodity is non-hazardous and
    lawful in all respects for POL
  • country/ Transit ports countries /POD
    country. This has to be proved by
  • written confirmation of competent
    authorities.
  • Shippers and consignees are well
    known, reliable parties.
  • To order B/Ls should not be
    accepted.
  • The commodity is fully secured and do
    not cause any damage to our
  • containers.

30
(No Transcript)
31
Other basic guidelines

32
Cargo screening procedures
  • Whether the shippers are credible or not comes
    first of all. If you have any doubt, proper
  • investigation should be carried out
    through method established by each local office
    or TMO. Know your shipper would be the very
    basic and most important policy to enhance our
    security and protect ourselves.
  • If the cargo is dangerous goods (DG) , you would
    proceed to DG application /approval procedures.
    Any errors or flaws should be fully corrected
    according to DG Handling Guide and DG Application
    Tools before shipment. If it is general cargo,
    please screen it through these Guidelines and
    confirm the pre-condition for acceptance.
    Applications to TMO/Planners are required for
    awkward cargoes, steel products, etc.
  • If the cargo requires inland transportation,
    especially, by rail, your pre-investigation
    must be carried out with utmost care, because
    even only 1 inadequate container would cause
    catastrophic result (such as derailment)
    involving many other containers or people.
  • If it is heavy cargo such as steel
    product, mold ,etc, please never fail to check
    each package weight and securing method and
    weight per M2,M3 for each product inside.
  • Steel coils or similar products must
    not be booked without prior approval from TMO.
  • (4) All the bookings have to be re-screened
    by a good system or responsible person before
    making it final.

33
Container seal inventory control
  • Whilst in normal circumstances we would
    expect that our (Kline supplied) container seals
    are given to our shippers on one seal per one
    booked container basis. It may also be the case
    that regular shippers, haulage contractors or
    terminals are supplied with a box in advance for
    operational convenience.
  • In any case, we specifically require a
    strong control over the inventory of KLine seals
    (both of given and remaining seals), as you will
    appreciate a weak or non-documented inventory
    control could directly result in our being found
    liable for loss or damage to cargo.
  • For your guidance, in recent case for which
    we could not escape our responsibility fully, two
    seals were given to a trucker for one booked
    container. The trucker (or their accomplice) put
    2nd seal after pilferage to pretend that the
    container was intact. Our way of seal control was
    severely questioned in the lawsuit.

34
Containers used for DG cargoes for US
  • This is an instruction circulated in
    February, 2004.
  • US Coast Guard(USCG) seems to be very
    zealous in inspecting physical condition of
    containers stuffed with DG cargoes and even
    slight damage to door/front sill would cause
    trans-loading of entire cargoes.
  • In this regard, it was instructed by GCCO
    that only Klines containers, which
  • are manufactured in/after1998 and called
    cone damage protector type (the lower parts of
    both ends of door and front sill are cut in order
    to avoid sill damage by stepping on twist cones
    or the similar during careless operation), should
    be assigned for the DG cargoes exporting to/from
    USA with immediate effect.

35
DG Placard
  • It is consignees obligation to remove the
    placards before their returning empty containers
    to our depot. Therefore it is primarily required
    to remind your customers (consignees) of this
    obligation.
  • It is then required to strengthen your control
    upon receipt of empty containers, e.g. by
    implementing not to accept containers with old
    placard policy and charging them for removal
    expenses.
  • Then please supply only containers without old
    placards and any other old labels for new
    shipments.
  • Please guide your shippers to attach correct DG
    placard at correct positions.
  • (DG placard requirement)
  • a) Dimension equal or larger than
    250mm x 250mm
  • b) Durability able to withstand
    90days water immersion
  • c) Position (for US) about 1.8 m
    above the bottom rail of equipment and away
  • from any kind of marking by at
    least 3 inches.
  • (for other
    area) about 1.2 m --- 1.8 m above the bottom
    rail.

36
Guidelines for handling cargo and container damage
  • If we failed to take proper action in handling
    cargo and/or container damage upon being
    detected, our customers trust would be easily
    lost and extra cost for dealing with the troubles
    would be possibly increased.
  • In this regard, we have issued Guidelines
    for handling cargo and container damage on 31st
    March, 2005 as basic reference materials.
  • You are requested to peruse and apply it in
    your daily scene.

37
Guidelines for Survey arrangement
  • Purpose of survey
  • When our containers are reported
    seriously damaged or cargo claim is lodged, we
    have to think of sending a surveyor to protect
    ourselves, minimize losses, or proceed to cost
    recovery, by finding out exact cause, damage
    nature, its loss amount and responsible parties.
  • (B) General procedures
  • (1) First of all, please collect all the
    available information about incident and
  • cargo/container damage condition
    through all the channels including clients.
  • (2) Make best estimate about cause and
    loss. US2,000 is important amount- wise
    criteria for your judgment on whether sending a
    surveyor or not, as the loss less than
    US2,000 is not covered by our insurance.
  • (3) Appoint a reliable surveyor and make
    your purpose of survey very clear upon
    making order.
  • (4) Check carefully preliminary survey
    report and request amendment, if you find any
    disadvantageous description for Kline in the
    report.
  • (5) Send survey report to all the related
    parties.

38
Partlow charts safekeeping
  • Partlow charts must be carefully treated as
    confidential documents, because they are
    basically used to protect our interest against
    any cargo claims lodged by our customers. Our
    safekeeping policy are shown as follows.
  • (1) Charts have to be removed before
    delivery of containers to customers.
  • (a) CY delivery
  • Charts have to be removed before
    gate-out. When our customers happen to have
  • a chance to see Container upon
    statutory inspection or other occasions, Charts
  • have to be removed beforehand
    and new Charts have to be attached.
  • (b) Door delivery
  • Charts have to be removed and new
    Charts have to be attached just before gate-out.
  • Newly attached Charts have to be
    removed when the unit returns to our depot..
  • (2) Removed Charts have to be kept in safe
    places
  • Removed Charts have to be kept for
    two years in safe places locally and be
  • available upon our inquiry.

39
Refrigerated foodstuff quarantine
  • Following recent outbreaks of livestock
    diseases such as BSE, Foot and mouth disease, and
    now Avian influenza(Bird flu), etc, most
    countries are introducing very strict animal
    quarantine and veterinary import regulations on
    foodstuffs. Typically the origin of the goods
    has to be an approved country or area, therefore
    trans-loading in other countries, or unauthorized
    door opening or seal exceptions would often lead
    to rejection by quarantine office at final
    destination. In this connection, please kindly
    note
  • When a machinery malfunction occurs on
    a food stuff, first and best option is always
  • to repair it.
  • If this fails and there appears to be
    no choice other than trans loading of cargo into
  • another container, please contact
    TMO and POD office and confirm regulations at
  • POD/POR in advance. The written
    approval of our clients is also required.
  • Any action taken without proper
    proceedings as above would result in more
  • complicated situation and further
    increase of extra cost.

40
Standard vanning policy for dry containers
  • The above list shows certain restrictions
    for cargo weight and size(individual), which can
    be accommodated within our containers safely.
    These restrictions were set up to protect our
    container from any potential physical damage.
  • The high density cargoes such as steel
    products, stones, etc, may exceed weight/m2 or
    Weight limit easily, therefore it is required
    to confirm cargo details and securing method for
    TMOs approval. Other restrictions were set,
    taking safety operation during vanning and
    devanning into consideration.

41
Standard vanning policy for Flat rack containers
  • Flat rack containers may be used when the cargo
    nature or dimension are not suitable for usual
    dry containers (so called awkward or Out of
    Gauge OOG cargo). The above diagram shows
    certain restrictions for flat rack containers.
  • Please be noted following points
  • It does not mean that all the cargoes within the
    restriction could be automatically accepted.
  • Awkward cargo application/approval procedures
    should be followed without exception.
  • Lashing plans or other technical information
    should be submitted upon request.
  • Leased flat racks, which could accommodate
    heavier cargoes (max payload about 34,000kg/20
    and 39,650kg/40), might be provided subject to
    availability.

42
Standard vanning policy for Open top containers
  • Open top containers may be used when the
    cargo nature or dimensions are not suitable for
    usual dry containers (so called awkward or Out
    of Gauge cargo). The above diagram shows
    certain restrictions for open top containers.
  • Please be noted following points
  • It does not mean that all the cargoes
    meeting the restriction could be automatically
  • accepted. Awkward cargo
    application/approval procedures should be
    followed without
  • exception.
  • Lashing plans or other technical
    information should be submitted upon request.
Write a Comment
User Comments (0)
About PowerShow.com