Choosing and Working with Wire Connectors: Mistakes to Avoid

1
Choosing and Working with Wire Connectors
Mistakes to Avoid
When it comes to buying any kind of
wire connectors, for example, computer
connectors or adapters, people are overconfident.
This is because they are unaware of the fact
that not all wire connectors are built in
the same way. This article will highlight some
common blunders that occur while buying wire
connectors. It will also provide you with
the insights to avoid these errors. Choosing the
wrong size The one size fits all logic cannot
be applied here. When a wire fits into the
connector, we often assume that it is perfect for
typical splices. This is not true as only
specific wire combinations are approved by
UL for every connector. If you do not
choose the right size, it can result into
failed connections and useless repairs. Solution
Get yourself acquainted with wire
connectors and know which wires they can fit with
according to the UL specifications. If you are
unaware of such specifications, you can also
check them on the website of the
manufacturers. In case information like this is
missing on the website, you should speak to the
manufacturers or authorities of the firm. As they
have the list of wire connectors and their UL
specifications, they will be able to help you
with the details in best way possible.
2
Overlooking the voltage details There are times
when people do not choose the exact voltage
required and end up buying either low or high
voltage connectors. Some also tend to use
whatever is available at the moment. This should
be avoided at all costs as you will have to redo
the connections. Not just that, you will also
lose the money you have spent on installing the
inventory and other equipment. Solution There
is just one. Conduct proper research on the
voltage needed for each wire connector. Read the
specifications and then finalize it. Giving too
little or too much torque You need to be careful
here! This is because if the torque applied is
too less, it can result into arcing, which
can cause a fire hazard. Moreover, if the
connection is weak, the system will not work in
the right way. Hence, make sure that you take
your own time to tighten every wire connector. On
the other hand, if the torque applied leads
to tight connection, it can cause a damage to
wire connectors. Solution You need to ask
yourself questions like, Is the connector
too tight? Are the wires outside the connector
twisted? Is it possible to pull the connector
without twisting? The answers to the first
two questions should be No. And the answer to
the last question should be yes. However, an
electrician can be a better judge of the torque
intensity. The above mentioned are some of the
most commonly occurring mistakes which can
lead one to having accident prone
surroundings and poor connections. The time
and money spent after these tasks are additional
pain points. So make sure you take your time and
choose your wire connectors wisely!
3

• See More Products Here
• http//www.sfcable.com/
• http//www.sfcable.com/cables-hdmi.html
• http//www.sfcable.com/network-ethernet-cables.htm
  l
• https//www.sfcable.com/cat5e-ethernet-cables.html
  
• http//www.sfcable.com/cat7-shielded-patch-cables.
  html
• http//www.sfcable.com/cat6a-ethernet-cables.html