Improve the Security of Your Home With an Electric Gate System

1
Improve the Security of Your Home With an
Electric Gate System
2
Types of Gate Automation Essentially in the UK,
two types of gate automation are used sliding
gates and swing gates, there are also a few
variations on these two basic operating methods.
Sliding gates can be track mounted, a track
system is installed to the driveway surface and
the gate runs on this track. This particular type
of installation requires a level driveway for the
track system to be installed on. Alternatively if
the driveway surface is uneven a cantilever
sliding gate can be installed, the gate is
designed to run on a pivotal point usually near
the gate motor, which suspends the gate over the
driveway.
3
Swing gates can be either a single leaf or a twin
leaf design, both operating in similar way. You
have the choice of a gate mounted operator or
underground gate operators. With gate mounted
operators the installation tends to be less
expensive due to the saving on groundwork's.
With an underground gate mechanism the motors
are enclosed in a housing that is flush with the
ground level, so you can't actual see the gate
motor. Although underground gate operators have
a more pleasing appearance, this type of
installation is not suitable in areas of flooding
as adequate drainage is essential for trouble
free operation.
4
Choosing the right installer Most automated gate
installers tend to install products from one
manufacture. This could be for many reasons,
discount from the supplier, quality, availability
and product knowledge to mention just a few. But
how do you know the products offered is the best
product for you? Nobody knows your lifestyle
better than you, consideration should be given to
how many times a day your gates will be used, if
you work from home and are constantly taking
deliveries all day the duty cycle of the
automation may need to be considered. The type
and weight of gate installed could determine
which gate operator is used, electromechanical or
hydraulic which more commonly used on hardwood
gates due to the weight. It is essential that
your gate installer specifies the products to be
used when quoting for the works, and do your
research on the automation your installer
proposes to use.
Choosing the right material gates Traditionally
wrought iron, steel and timber gates are
installed, but increasingly aluminium is being
used as an alternative due to the low maintenance
requirements. The materials the gate is
manufactured from can significantly impact on the
overall cost of the installation. A solid
hardwood gate that is fully boarded would cost
approximately double for a similar installation
in softwood. Due to the additional material costs
and the increased in cost due to the gates
requiring a heavy duty gate operator.
5
Choosing Access system Your decision to purchase
automated gates was likely to have been
influenced by securing your property. However
from time to time visitors and delivery drivers
will need to access your property, you will most
likely use remote control key fobs to enter and
exit but it is not practical or cost effective to
give everybody that may use your automated gates
a remote key fob. Instances like these require
addition access options, intercoms systems and
keypads are the most obvious product to install.
Intercoms come in many different forms. GSM
intercoms are ever increasing in popularity
allowing the flexibility to open your automated
gates from virtually anywhere in the world, so
you won't miss your delivery even when you're at
work.
Article Source http//EzineArticles.com/4827379
Image Source https//qga.com.au/