Coherent Doppler Lidar Measurements of the Atmospheric Boundary Layer - PowerPoint PPT Presentation

1 / 33
About This Presentation
Title:

Coherent Doppler Lidar Measurements of the Atmospheric Boundary Layer

Description:

TLS instrumentation required for accurate in situ turbulence profiles ... Small scale turbulence information ( ) is most robust ... – PowerPoint PPT presentation

Number of Views:88
Avg rating:3.0/5.0
Slides: 34
Provided by: spaceH
Category:

less

Transcript and Presenter's Notes

Title: Coherent Doppler Lidar Measurements of the Atmospheric Boundary Layer


1
Coherent Doppler Lidar Measurements of the
Atmospheric Boundary Layer
  • R. Frehlich, Y. Meillier, M. Jensen
  • University of Colorado, Boulder, CO

2
Acknowledgments
  • Army Research Office (Walter Bach)
  • NSF (Steve Nelson)
  • CTI (Steve Hannon, Jerry Pelk, Mark Vercauteren)
  • NREL (Neil Kelley)

3
Boundary Layer Profiles
  • Required for atmospheric dynamics and numerical
    model parameterizations
  • In situ sensors are required for high-resolution
    profiles of wind speed, temperature, and
    turbulence
  • Scanning Doppler lidar provides spatially
    averaged profiles over a 3D measurement volume
  • Optimal lidar design and processing algorithms

4
CIRES Tethered Lifting System (TLS)Hi-Tech
Kites or Aerodynamic Blimps
5
High Resolution Profiles from TLS Data
  • TLS instrumentation required for accurate in situ
    turbulence profiles
  • Hot-wire sensor for small scale velocity
  • Cold-wire sensor for small scale temperature

6
Lafayette Campaign
7
CTI LIDAR VELOCITY MAP at 1o
  • Radial velocity
  • 100 range-gates along beam
  • 180 beams (0.5 degree)
  • 18 seconds per scan (Taylors frozen hypothesis is
    valid)

in situ prediction
8
Wind Speed and Direction
  • Best-fit lidar radial velocity for wind speed and
    direction
  • Spatial average reduces estimation error
  • Smaller angular regions produce useful fits
  • Fluctuations around best-fit are defined to be
    turbulence

in situ prediction
9
Turbulence Estimates at 0o
  • Structure function of radial velocity in range a)
  • Best fit produces estimates of ?u, ?u, L0u
  • Structure function in azimuth b)
  • Best fit produces estimates of ?v, ?v, L0v

in situ prediction
tropprof04
10
Turbulence Estimates H80 m
  • Best fit for noise corrected structure function
    (o)
  • Raw structure functions ()
  • Radial velocity has small elevation angles (lt
    4o)
  • Structure function in azimuth b)
  • Best agreement in ?u and ?v (isotropy)

in situ prediction
tropprof04
11
Lidar and TLS Profiles
12
Large Turbulent Length Scale
  • Difficult to separate turbulence and larger scale
    processes
  • Similar to stable troposphere
  • What is optimal methodology?

13
Filter Radial Velocity in Azimuth
  • Raw data has large L0
  • Filtered data has well defined length scale
  • Good agreement in ?v
  • Variance ?v2 is reduced by filtering

in situ prediction
tropprof04
14
Profiles with Filtered Data
  • Filtered data has small effect on e
  • Largest effect on L0
  • Good agreement at low altitudes when L0 is small

in situ prediction
tropprof04
15
CU/NREL Wind Energy Research
  • High turbulence conditions
  • Height variation of ?, ?, and L0
  • Ideal input for optimal wind farm operation

in situ prediction
tropprof04
16
Summary
  • In situ (TLS) measurements are required for
    resolving small scale features and identifying
    spatial variability
  • Doppler lidar produces high quality volume
    averaged measurements
  • Small scale turbulence information (?) is most
    robust
  • Simultaneous profiles of longitudinal and
    transverse velocity statistics is feasible
  • More optimization is required especially for low
    turbulence conditions

17
Velocity Turbulence
  • Along-stream velocity u(t)
  • Spectrum Su(f)
  • Taylors frozen hypothesis
  • Energy dissipation rate ?

18
Temperature Turbulence
  • Along-stream temperature T(t)
  • Spectrum ST(f)
  • Taylors frozen hypothesis
  • Temperature structure constant CT2

19
LIDAR, SODAR AND TLS (BLIMP)
20
LIDAR AND TLS (BLIMP)
21
Low Turbulence Data
  • Accurate corrections required
  • Correct model for spatial statistics

e 5.0 10-6 m2/s3 ?v 0.090 m/s L0 140 m
22
LOW TURBULENCE
in situ prediction
23
LAFAYETTE DATA
24
CONVECTION
in situ prediction
25
SUMMARY
  • In situ (TLS) and volume averaged (lidar)
    measurements are complementary
  • Accurate lidar derived turbulence measurements
    are feasible
  • More optimization is required especially for low
    turbulence
  • High resolution TLS data essential
  • Spatial statistics of the turbulent fields are
    not well known

26
SUMMARY
  • In situ (TLS) and volume averaged (lidar)
    measurements are complementary
  • Accurate lidar derived turbulence measurements
    are feasible
  • More optimization is required especially for low
    turbulence
  • High resolution TLS data essential
  • Spatial statistics of the turbulent fields
    require more research, especially for stable
    conditions

27
DAILY SUMMARY PLOTS
  • Zero elevation angle scan
  • Typical daily pattern (low turbulence at night)
  • Wind speed, direction, and ? are critical
    parameters for TD
  • Low wind speeds can have erratic direction

in situ prediction
28
Velocity Turbulence
  • Along-stream velocity u(t)
  • Spectrum Su(f)
  • Taylors frozen hypothesis
  • Energy dissipation rate ?

29
Temperature Turbulence
  • Along-stream temperature T(t)
  • Spectrum ST(f)
  • Taylors frozen hypothesis
  • Temperature structure constant CT2

30
WIND PROFILES
  • Urban environment
  • Operational real-time profile for low altitudes

31
WIND PROFILES
  • Larger domain
  • Operational real-time profile for data
    assimilation

32
LAFAYETTE DATA
33
TURBULENCE STATISTICS
  • Magnitude of turbulence is the standard deviation
    ?
  • Spatial size of fluctuations is the length scale
    L0
  • Magnitude of the small-scale fluctuations is ?

in situ prediction
Write a Comment
User Comments (0)
About PowerShow.com