Control of microbes in foods - PowerPoint PPT Presentation

1 / 31
About This Presentation
Title:

Control of microbes in foods

Description:

Control of microbes in foods Keeping them out Physically removing them Preventing their growth Killing them General observations about microbial control Cells in log ... – PowerPoint PPT presentation

Number of Views:84
Avg rating:3.0/5.0
Slides: 32
Provided by: AnnW161
Learn more at: https://www.hartnell.edu
Category:

less

Transcript and Presenter's Notes

Title: Control of microbes in foods


1
Control of microbes in foods
  • Keeping them out
  • Physically removing them
  • Preventing their growth
  • Killing them

2
General observations about microbial control
  • Cells in log phase are more susceptible to injury
  • More effective when fewer microbes are present
  • Spores are more resistant than vegetative cells
  • Gram-negative organisms are more susceptible to
    many methods
  • Bacteria, molds, yeasts, and viruses have
    different susceptibilities

3
What are some strategies for microbial
control/preservation?
4
Control of access (cleaning and sanitation)
  • What is sanitation?
  • Reducing microbial count to acceptable level
  • How do you achieve it?
  • Consider food contact surface
  • Ingredients
  • Integrated into plant design
  • Light, air, ventilation
  • Water quality
  • Workspace design

5
Water, ice, brine, curing solutions
  • Many uses for water
  • Keep ice germ-free
  • Chilled water can cause cross-contamination
  • Warm water for washing thermoduric bacteria
  • Brine and curing solutions should be made fresh
    and used frequently

6
More essential plant features
  • Dry air, free of dust
  • Well-trained (and healthy) personnel
  • Well-maintained equipment
  • Detergent, high-pressure distribution
  • Skin contact?
  • Clean-in-place protocol?
  • Cleaning schedule

7
Sanitation
  • Physical
  • Hot water, steam, hot air, UV irradiation
  • Chemical
  • Desirable features effectiveness, non-toxicity,
    non-corrosiveness, ease of use, stability, cost
    effectiveness
  • Detergent sanitizers and clean and sanitize

8
(No Transcript)
9
Type of chemical sanitizer Advantages Disadvantages
Chlorine-based Wide range of effectiveness Fast acting cheap Unstable Can oxidize food Less active in hard water
iodophores Fast-acting, noncorrosive, easy to use, stable Expensive, less effective against spores and viruses, affect flavor, eract with starch
Quats (QACs) Very stable, noncorrosive, bacteriostatic Expensive, limited range, require rinsing
Hydrogen peroxide Can be sterilant can be used as liquid or vapor Organic materials reduce its effectiveness
10
Decontamination and sanitation of raw fruits and
vegetables
  • Washing
  • Chlorine (50-200 ppm) ozone (0.1-2.5 ppm)
    peroxyacetic acid (lt80 ppm) plant essential oils
  • Decontamination
  • Chemical sanitizers in liquid or vapor form
  • ClO2- chlorine dioxide gas
  • Ozone
  • Hydrogen peroxide, etc.
  • Effective against Gram-negative pathogens

11
Standards, specifications, guidelines
  • Maximum acceptable levels standards enforced by
    regulatory agencies
  • Examples 20,000 cfu/ml in milk, less than 10/ml
    coliforms (standard plate count)
  • Most foods have specifications agreements
  • Achievable if good cleaning, sanitation, and
    handling is observed

12
Removing microbes
  • Centrifugation
  • Large contaminants in liquids
  • Could be combined with heat treatment
  • Filtration
  • Heat-sensitive liquids
  • air
  • Trimming
  • Washing
  • Combined treatments can work better
  • Heat, high pressure, chemicals
  • Try to avoid biofilm (highly resistant to
    removal)

13
Heat treatment
  • One of the oldest antimicrobial methods!
  • Mathematical precision (heat to what temperature
    and for how long?)
  • Destroy microbes- some or all?
  • Heat-stable enzymes, toxins
  • Sometimes the first step in a fermentation
    process (kill off the competition)
  • Overcome natural ability to react to heat

14
Influencing factors
  • Nature of food
  • Small chunks vs large chunks (more heat
    susceptibility)
  • High aw vs low aw
  • Low pH vs high pH
  • Nature of microbes
  • Vegetative vs spores
  • Low vs high numbers of microbes
  • Exponential vs stationary phase of growth
  • Nature of process
  • Higher the temperature, shorter the holding time

15
D values and thermal death time
  • D value time in minutes to reduce number of
    cells by 90 by a specific treatment
  • Thermal death time (TDT) complete killing
  • Will be longer for spores than vegetative cells
  • 12D process for canning high-pH foods

16
Methods of heat treatment
  • Low-heat (less than 100oC) Pasteurization
  • Microwaves hot but problematic
  • High heat (greater than 100oC)
  • Low acid 12D to kill C. botulinum spores
  • Other spores can survive, but wont germinate
    below 30oC
  • High acid dangerous spore formers dont grow
  • UHT will kill microbes, but may not destroy
    enzymes or toxins

17
Control by low temperature
  • Another ancient technique refrigeration really
    took off after WWII
  • Frozen foods, new technologies increase shelf
    life
  • Unintended consequences (new pathogens)
  • How does cold control microbes?
  • Slows metabolic activity
  • Aw and pH are reduced
  • Freezing and thawing disrupts cell structures

18
Influencing factors
  • Nature of process
  • Most free water is frozen at -20oC
  • Fluctuation in temperature can promote growth
  • Slow cooling, slow thawing, can promote microbial
    growth
  • Nature of food
  • Neutral pH, high Aw, absence of inhibitors
  • Nature of microbes
  • Gram-positive cocci are more resistant to
    freezing damage
  • Some spores can germinate at low temperatures do
    not lose viability

19
Methods
  • Ice chilling (0-1oC)
  • Watch for temperature fluctuation,
    cross-contamination
  • Refrigeration
  • Combine with dryness, preservatives, low pH
  • Freezing- will kill microbes

20
Reduced water activity
  • Removing free water
  • Naturally
  • Mechanically
  • Freeze-drying
  • Foaming
  • Smoking
  • Can kill some microbes, but some are resistant
  • Usually combined with other methods to increase
    effectiveness

21
Acidification denatures proteins, inhibits
nutrient transport, affects spore formation
  • Natural
  • Fermentation products
  • Acetic acid (vinegar)
  • Propionic acid-effective against molds and
    bacteria
  • Lactic acid-bacteria
  • Citric acid- chelates divalent cations
  • Sorbic acid- more effective against yeasts and
    molds
  • Benzoic acid-inhibits respiration
  • Parabens-broad-spectrum antimicrobials

22
Modified atmosphere (removing oxygen)
  • CAP (controlled atmosphere packaging)
  • Long-term, continuous monitoring
  • Modified atmosphere packaging (MAP)
  • Remove air and flush with gas
  • like CO2 or nitrogen
  • Vacuum packaging (VP)
  • Prevents aerobic respiration
  • CO2 slows growth rate
  • Facultative anaerobes and
  • anaerobes can benefit

23
Antimicrobial preservatives
  • Compounds that kill microbes (innate or added)
  • Static or cidal
  • Will not sterilize foods
  • Criteria
  • Must be safe to use (!)
  • Should not affect quality of food
  • Stable
  • Effective in food environment

24
Examples of antimicrobial preservatives (GRAS,
generally regarded as safe)
  • Nitrates and nitrites-controls C. botulinum
  • Sulfur dioxide and sulfites- broad spectrum, can
    be allergenic
  • Epoxides- used as fumigants
  • EDTA- helps destabilize Gram-negative cell walls
  • Lysozyme-protects against Gram-positives
  • Antibiotics- can be used as sprays
  • Wood smoke- formaldehyde, phenols, cresols
  • Spices- many antimicrobial compounds

25
Gamma-(?)-Irradiation
  • Microbicidal against a wide variety of microbes
  • This type of radiation is focused and penetrating
  • DNA is damaged and correlated to dose
  • Can penetrate food packaging
  • Cobalt-60 usually used (half-life of 5.3 years)
  • Moldsgtyeastsgtbacteriagtviruses in sensitivity
  • Toxins are not destroyed

26
Use of irradiated foods is limited in
U.S. Spices, flour, potatoes before
1985 permitted irradiated foods Food prep
surfaces may be UV- irradiated
27
Are there new and better technologies?
  • Demand for minimal processing
  • Long-wave electromagnetic waves
  • Ohmic heating by electric currents passed through
    food
  • Pulsed electric fields
  • High-hydrostatic pressure processing (HPP)
  • All high-energy, short time exposures
  • Purpose to kill microbial cells

28
Possible uses for HPP
  • Adjust pressure to kill vegetative cells (low) or
    endospores (high)
  • Dont disrupt internal environment, so foods are
    more natural
  • Food processing tenderize meat, inactivate
    spoilage enzymes or other undesirable molecules,
    thaw food rapidly extend shelf life
  • Potentially, could sterilize food

29
Hurdle technology combine methods
  • Treatment may be effective but affect food
    acceptability
  • Methods that suppress one organism may enhance
    another
  • Requires careful study

30
Examples
  • Combine low heat treatment with acidification and
    preservatives
  • Some preservatives act synergistically (NaCl and
    BHA)
  • Vacuum packaging and acidification to reduce
    anaerobe growth
  • One treatment may stress a microbe to increase
    its susceptibility to killing
  • Promising but preliminary

31
Summary
  • Food preservation technology has existed for
    millennia
  • Many strategies required because of the diversity
    of food (and microbes)
  • Microbes are extremely adaptable
  • Combinations of techniques may be most effective
  • Food cant just be safe, it has to be good!
Write a Comment
User Comments (0)
About PowerShow.com