Reducing the Risk – Hilti as your preferred partner for Health & Safety

1
Reducing the Risk Hilti as your preferred
partner for Health Safety

• Awareness Presentation

2
Agenda
Hand-arm Vibration Tool handling and
selection Alternative methods Hilti Product
Selector Dust Noise Working at Height
3
Current legislation

• European and national laws regulate exposure of
  workers to both physical and chemical agents
• It is the responsibility of the employer to
  ensure that these laws are adhered to 13.7 MB
  (14,367,744 bytes)

• To comply with legislation, in general employers
  must
• Design out risks where possible
• Inform workforce of health safety risks
• Assess the risks
• Provide an actionable solution
• Deliver training to employees
• Keep health and action records
• This applies to the four key areas of risk

4
Health Safety Four Key Areas of Risk
Dust
Hand-arm Vibration
Noise
Working at Height
5
Basics of Hand-Arm Vibration
Most handheld power tools transmit vibration to
the hands and arms. Over exposure to vibration
can result in Hand-Arm Vibration Syndrome
(HAVS). Each year, HAV accounts for
approximately 3,000 new claims for Industrial
Injury Disability Benefit, the greatest number
being in the construction industry. This has led
to an incremental increase in insurance premiums.
Exposure Action Value (EAV 2.5 m/s2)
The level that can be worked to without any
health surveillance in place. A tool with a
vibration magnitude of 2.5m/s2 or below can be
used for an 8 hour day without any risk
Exposure Limit Value (ELV 5.0 m/s2)
The absolute maximum level allowed, below this,
but above EAV, additional controls such as health
surveillance must be in place

• All vibration monitoring systems offer
  transparency to exposure to hand-arm vibration
  with relation to EAV and ELV

6
Reducing the Risk of HAVS Tool Handling
Drilling and Breaking

• Hold tool in a stance which allows good balance
• Hold tool below shoulder level where possible
• Restrict the contact pressure to a level where
  the tool function most effectively
• Always grip both handles and restrict grip force
  just sufficient to hold tool securely

• Just because it doesnt shake, it doesnt mean
  that it wont work
• Let the tool do the work

7
Hand-Arm Vibration
coffebean_meter.mpg
Hilti ATC safety system.mpg
8
Reducing the Risk of HAVS Tool Handling
Cutting Grinding

• Always use low vibration side handle
• Ensure that you have been trained to use
  grinders and you have a valid certificate

• Reciprocating Saw - an alternative method to
  grinding
• Clamp adaptor reduces vibration

9
Reducing the Risk of HAVS Use the correct
consumables - drill bits designed for higher
speed

• Watch out for signs of wear and tear

10
Reducing the Risk of HAVS Use the correct
consumables - chisels with longer life and
optimum performance

• Longer and consistent performance chisels

11
Reducing the Risk of HAVS by offering alternative
Methods
Drilling
Light Duty Drilled Fixings
Mechanical Scabbling
Breaking
Conventional method
Diamond coring
Direct Fastening
Wire Sawing
Grinding
Alternative
12
Reducing the Risk of HAVS Alternative Methods
Direct Fastening to replace light duty
drilled fixings
Wire sawing to replaced mechanical breaking
Grinding surface preparation to
replace mechanical scabbling
Diamond drilling is a low vibration
method of hole drilling
Lightweight channel system
13
Reducing the Risk of HAVS Assess the risks by
working with Hilti

• Hilti provides complete transparency of our
  products vibration and noise levels as well as
  the required dust solution in the Hilti Tool
  Selector

www.hilti.co.uk/hands
14
Reducing the Risk of HAVS Hiltis unique
productivity-based Tool Selector
Productivity figures
Noise level
Consumable
Dust removal
HSE Points
15
Reducing the Risk of HAVS Combining HSE Points
with Productivity

• The best possible way of measuring exposure to
  vibration
• Valuable planning tool when coupled with the HSE
  points calculator

16
Health Safety Key Areas of Risk
Dust
Hand-arm Vibration
Noise
Working at Height
17
Reducing the Risks of Dust
Types of dust
Inhalable dust Gets into the mouth and nose
Thoracic dust Reaches the upper respiratory area
Respirable dust Reaches the finest parts of the
lungs (alveola)
Source www.lungenaerzte-im-netz.de
www.atmosphere.mpg.de
18
1
19
2
20
3
21
4
22
5
23
6
24
(No Transcript)
25
Hilti DRS improves customer productivity
Application Speed
up to 20
no DRS
up to 15 kg/h
WorkerProtection
LongerLifetime
Labour TimeSavings
Results may differ based on operator technique,
specific application, and tool/accessory
condition. The need for additional measures must
be evaluated by the responsible health and safety
personnel on site.
26
Hilti DRS with a massive reduction of the
potentially hazardous dust
Inhalable Dustmg/m3
Respirable Dustmg/m3
527.8
107.8
-99.8
-99.8
0.58
0.20
no DRS
no DRS
Tests measurements performed by TÜV with DC SE-20
and VC 40-UM
27
Harmonised dust removal systems must be used at
construction sites
no dust removal system
Inhalable Dust 1000 mg/m³
Respirable Dust 220 mg/m³
9,2 kg
Inhalable Dust 3.6 mg/m³
Respirable Dust 1 mg/m³
DCH 180-SL Slitting cable channels in concrete
for 1 hr
120 g
Workplace limits vary and are depending on local
regulations and type of dust. Results may differ
based on operator technique, specific
application,and tool/accessory condition. The
need for additional safeguards must be evaluated
by the responsible health and safety personnel on
site.
28
Hilti DRS has a positive impact on both tool and
consumable lifetime
Consumable Lifetime
Tool Lifetime
up to 20
up to 60
140 h
620 m
510 m
85 h
no DRS
no DRS
Proven in multiple tests that dust has a negative
impact on performance and lifetime on brushes and
electronics
Proven that DRS has a positive impact on
performance and lifetime on consumables Reason
Removal of old dust particles and air stream
cooling improves life and speed
29
Hilti DRS brings significant productivity gains
Application Speed
CleaningEffort
up to 20
65 cm2/min
15 kg
55 cm2/min
70 g
no DRS
no DRS
Proven that DRS has a positive impact on
performance and lifetime on consumables Reason
Removal of old dust particles and air stream
cooling improves life and speed
Tests show Total amount of concrete dust in the
surrounding after 1h application is 15kg w/o DRS
and 70g with DRS (DC 20-SE VC 40-UM)
30
Hilti provide a tool and a DRS solution for most
applications
Convertible
Convertible
Integrated
Cutting Grinding
Cutting Slitting
Drilling Breaking
Grinding
Jig Sawing
Drilling
Core Drilling
Sawing Sanding
DRS Accessories
DRS Accessories
Vacs to complete the system
31
Hilti also offer alternative methods, when
combined with our DRS solutions we have the best
offer in the market
Alternative Methods
Alternative to manual and breaker demolition
Alternative to Drilling and Anchor setting
DX
Wet Drilling
Wet Sawing
GX
Vacs to complete the system
32
We offer our customer substantial productivity
gains with an unmatched offer
Why Dust Free?
Why Hilti?

• HS
• Pure Comfort
• Higher visibility

Worker Protection
Full Systems

• Superior performance
• Full compatibility
• Allow future DRS add on

IncreasedLifetime

• Lifetime of power tools
• Lifetime of consumables

Broad Offer

• All relevant applications
• One partner needed
• Alternative methods

• Higher application speed
• Less cleaning efforts
• Less breaks

Labour TimeSavings
Service and competence

• LTS and FM
• The right solution
• HS training

Productivity
33
One last thought on dust
Dust_chamber.avi
34
Health Safety Key Areas of Risk
Dust
Hand-arm Vibration
Noise
Working at Height
35
Reducing the Risk of Noise

• Loud noise can cause permanent damage to your
  hearing. Once you loose your hearing, you will
  never recover it
• A European directive has been issued to protect
  workers from exposure to excessive noise The
  Physical Agents (Noise) Directive

36
Reducing the Risk of Noise What do employers
need to do?

• Inform and train their workforce about
• Noise and the associated risk
• How they can protect themselves
• What measures the employer has taken
• Provide suitable protective equipment for their
  employees use
• Assess and manage the risk
• Define who has what risk level
• Provide health surveillance for their employees
  where risks cannot be eliminated
• Consider alternative methods and job rotation
• The risk assessment must be recorded by the
  employer and kept up to date

37
Reducing the Risk of Noise What should workers
do?

• Report any signs of hearing damage immediately to
  their supervisor. Symptoms are
• Difficulty following a conversation, also on the
  phone
• The family often complains that the TV is too
  loud
• Tinnitus (constant ringing, whistling or humming)
  in the ears may also be a sign
• Use the right kind of ear protection
• There is a wide variety of ear protection
  available
• Pick the one best suited to the applicable job
• Consider alternative methods
• Consider alternative methods of doing the job, e.
  g.
• Diamond drilling instead of chiselling
• Direct fastening instead of drilling

38
Health Safety Key Areas of Risk
Dust
Hand-arm Vibration
Noise
Working at Height
39
Reducing the Risk of Working at Height

• Falls from Height remain the biggest single
  cause of workplace deaths and one of the main
  causes of major injury
• Hilti offers a comprehensive range of tried and
  trusted systems to you reduce your exposure to
  many of the risks of working at heights.

40
Reducing the Risk of Working at Height with Hilti
systems solutions
Laser measuring and alignment tools
DX pole tool
twist and lock installation channel assembly
systems
Cordless power tools
41
Hilti Professional Services Reducing Key
Areas of Risk
Hand-arm Vibration
Dust
Working at Height
Noise
Hilti Professional Services complement high
quality products with the aim to support our
customers business in reducing key areas of risk
42
Reducing Health Safety Risks Hilti
Professional Services
A fixed monthly charge covers all tool service
and repair costs. That greatly simplifies your
financial planning and makes tool fleet
administration easier. For your safety,
convenience and peace of mind, this incudes

• Loan tools in the event of a breakdown,
  encouraging customers to return faulty or damaged
  tools and avoid working with potentially unsafe
  tools.
• Tool Exchange At the end of the usage period each
  tool is replaced with the latest generation
  ensuring compliance with the latest safety
  standards.

Each repair is completed to the highest possible
standard including a full safety check. This
guarantees consistent high tool performance, low
vibration values and the utmost of safety.